Vehicle Rubber Bushing with Metal in Shock Absorber

Product DescriptionItemRubber Bushing with metal InsertMaterialCR/EPPDM/NBR/TPE/Neoprene/NR/SBR optionalHardness30-97AApplicationAutomobile, fuel pump, radiator, engine, gearbox , etcSizeAs your requirementCertificationFactory passed ISO:9001:2000, ISO/TS16949:2009PerformanceDurable, and resistant to heat, high and low temperatures, acid-alkali, ozone, UV, aging, etcTrade infoMOQ500pcs,also accept for sample ordersLead timeUsually 20~25,also depends on actual orderPayment terms30% T/T advanced,balance before shipmentSample making-timeAs most of our pruducts are customized,it depends on your orderRubber Bushing with metal Insert
Our Advantage
1.FactoryProducts&FactoryPrice. 2.Highqualitywithcompetitiveprice&excellentsurface.3.OwnprofessionalR&Dteam,qualitycontrolteam,experiencedworks,andgoodsalesmenserviceforourclients.4.LowMOQ:Welcomeyoursamplestocustomthepartswithfewquantities.5.Fastdeliveryandsendthesampleto/confirm/ibeforeloading.6.Convenienttrafficcondition:OurfactoryisnearShanghaiPort,NingboPort,GuangzhouPortandShenzhenPort.7.ToacceptyouranyinquiriesjustwithOENO.,or555No.,orMOOGNO.,ortheotherinformation.8.SeveralthousandsofcarsparepartsusedforJapanesecars,KoreanCars,European&AmericanCars.9.OurmarketreferstoMiddleEast,North&SouthAmerica,SoutheastAsia,Russia,SouthAfricaandEurope.10.ProvideOEMandODMservice.
FAQ

1.When can i get the price?

Quotation will be provided within 24 hours after inquiry is received with full product information. if you need the quotation urgently then please indicate upon inquiry and we will espedite it.

2.What is MIM technology?
metal injection molding process lie in its capability to produce mechanical properties nearly equivalent to wrought materials, while being a net-shape process technology with good dimensional tolerance control. metal injection molded parts offer a nearly unlimited shape and geometric-feature capability, with high production rates possible through the use of multi-cavity tooling

3.Is the metal melted during the molding process?

No, only the binders are melted allowing the powders to flow like a plastic material. Upon cooling the binders solidify giving the part strength for handling. The part must be subsequently sintered to high density to achieve the requirde mechanical properties.

4.Why should I use MIM?

MIM escels in producing small, highly complex parts that are difficult or cost prohibitive to produce with convertional technologies such as machining or casting.