Ultipower 48V 30A High Power Battery Charger With BMS (UBC-320)

UltiPower 48V 30A lead acid battery chargersSpecification:Model 48V30ACharging Rate30ABattery Capacity150-300AHInput Voltage110VAC and 220VAC, 50-60HZCharging Voltage58.8V or adjust to battery's specificationHumidity5-95% With packageAltitude≤3000m,Work normallyHigh temperature ambient operating+40°C,Features OKLow temperature ambient operating-20°C, Features OKHigh temperature storage+70°C,Work normally after recovery under normal temperature for 2 hoursLow temperature storage-40°C,Work normally after recovery under normal temperature for 2 hoursHousing materialCast Iron/ AluminumCoolingnatural coolingCharging modeMulti-stage (max 8)full automatic switch mode,(reverse) pulse chargingAppropriated Battery48V lead acid battery,AGM,AGL,GEL,VRLA,SLA,FLOODED,WETDimensions360*210*133mm(cast iron)372*194*120(aluminum)Weight7.25kg (net)CertificationCE and RoHS
Main Features:Compact & Delicate & Energy Saving -- Switch Mode TechSmall and light,as we adopt the switch mode technologyor called Switching Power Supplytechnology. Compared withtraditional Linear Powertechnology, ours is more energy saving as more than 85% electric energy is transferred to battery chemical energy duringcharging process while traditional tech can onlytransfer 40%.The tech is suitable for all types of lead acid batteries (wet,flooded, maintenance free, VRLA, AGL,AGM, GEL, etc)as well as lithium, lipo batteries.Automatic-- MCU controlMCU system is applied. The whole chargingprocess is monitored. Multi-stagechargingautomaticallyproceeds.No need for manual interference.
Automatically stops charging when the battery is full. You can leave the charger connected to the battery infinitelywithout the risk of overcharging. once the battery is full, the charger monitors the battery's voltage intermittently. If battery'scapacity decreases or voltage dropsunder set level, the charger can start again to charge battery to its full.Multi-stage charging--full charge but never overcharge& save battery & save energyMax 8 stage: pre-charging, soft charging, main charging (bulk charging), secondary charging, high constant voltage charging (absorption charging), 3-minute test, Float charging, End maintenance charging.
This way can well transfer electricity into battery according to battery's absorption ability. On the one hand, save energy; on the other hand, protect battery from over-charging, therefore less gassing less temperature rising.Floatcharging and End maintenance charging also help protect battery and prolong its lifetime.
Recover BatteryCapacity--Pulse & Reverse Pulse TechPulse and reverse pulse technology is applied. The chargergenerates pulseand reverse pulse to reduce battery'simpedance,gassing and temperature rise,restore the sulfate into liquid to recover battery capacity, therefore toprolong its lifetime. Pulse charging also can help charge fast and fully.Pulse Charging might not be applicable to Lithium, Lipo, Li-ion battery, which need constant current to charge.
Digital Display& IndicatorOur charger has 4-digital display. Digital display will show battery'scharging voltageand current and error code and more information. Floating charging will have time count-down, so that user knows when battery can be ready.Indicator lights can be added and defined as requested.The display can be customized or re-defined.More ProtectionTester function: If battery has abnormal state, the charger will display error code and reminds User to check battery whether it is good or bad.Polarity Protection: Prevents the output leads from sparking due to accidental reverseconnection or short circuit.Overchargeand Over-voltage Protection: never worry about overcharging or over-voltage as chargerautomaticallystops when battery reaches set voltage or currentTemperature Compensation: There is temperature sensor to monitor charging environmental or battery's temperature to tell MCU to adjust charging program for different temperature accordingly. This function allows our charger to charge battery to its full in whatever climate and seasons. (Thisfunction needs to know battery's relative parameter and so optional)
CustomizationWe can change parameter to meet different applications. Make charger specifically for your battery.
CE and RoHS We have CE and RoHScertification.9. Warranty
We design our charger for 3 years and offer one-year warranty.Remark: We can also supply 12V1-50A, 24V1-40A,36V1-40A,48V1-40A,60V1-30A,72V1-30A. Thank you send me inquiry about the charger you need.