Sanitary Stainless Steel BAW Centrifugal Pumps with Bilge

Sanitary Stainless Steel BAW Centrifugal Pumps (type 1) with BilgeBAW Centrifugal pump is an efficient and economical pump both due to meeting the requirements of the health and gentle handling of product and to its chemical stability. It is applies to most fields of the sanitary industry.Power: 2.2kw Flow: 10T/H Lift: 24M
Max inlet pressure: 500kpa(5bar)
Temperature range: -10-+140degree
Noise level(Distance of 1 meter): 60-85Db(A)
Pressure: Max500kpa(5Bar): Water consumption: 0.25~0.5L/HMaterial:
Teel PART: 304/316L
Seal: EPDMMotor: With a basic flange mater, according to IEC metric standard. When the Voltage frequency 50/60Hz, two electrodes is 3000/3600rpm
Frequency, Voltage and Power(3~phase Electricity)
50HZ, 220-240V/380-420V<4KW(Recommended)
60HZ, 250-280V/440-480VY<6KWTypeFlow(ton/h)Distance(M)Power (kw)Entrance diameterNMLX-3-163160.751.5"/1.5"NMLX-5-155151.11.5"/1.5"NMLX-6-226221.51.5"/1.5"NMLX-10-2010201.51.5"/1.5"NMLX-15-1815182.21.5"/1.5"NMLX-20-1620162.21.5"/1.5"NMLX-3-243241.52"/1.5"NMLX-5-245241.52"/1.5"NMLX-10-2310232.22"/1.5"NMLX-25-20252032"/1.5"NMLX-5-305302.22"/1.5"NMLX-10-2510252.22"/1.5"NMLX-10-32103232"/1.5"NMLX-15-24152432"/2"NMLX-20-25202542"/2"NMLX-30-2530255.52.5"/2"NMLX20-3520355.52"/2"NMLX-30-3230325.52.5"/2"NMLX-40-3040307.52.5"/2"NMLX-5-5055032"/1.5"NMLX-10-40104032"/1.5"NMLX-10-50105042"/1.5"NMLX-15-4515455.52"/1.5"NMLX-30-3630367.52.5"/2"NMLX-10-3610367.52.5"/1.5"NMLX-10-601060112.5"/1.5"NMLX-20-752075112.5"/1.5"NMLX-25-602560112.5"/2"NMLX30-603060152.5"/2"NMLX-30-653065152.5"/2"NMLX-20-732073152.5"/2"NMLX-25-702570152.5"/2"NMLX-30-683068152.5"/2"NMLX-50-255025112.5"/2"NMLX-30-453045112.5"/2.5"NMLX-40-454045112.5"/2.5"NMLX-60-406040153"/2.5"Medium Temperature (Normal Type)-20 to 180 Degree CelsiusMedium Temperature (Hign Temperature)-20 to 300 Degree CelsiusEnviroment Temperature-10 to 60 Degree Celsius
DELIVERY:
The delivery depends on different machines with different configurations. Please contact us to confirm it is in stock or not.PAYMENT:
We prefer to do 100% T/T (30% T/T in advance, 70% T/T before shipment)FAQ:
I. Are you factory?
Yes,we are factory and we're specilized in manufacturing valve for 15 years.
II. Which countries do you expot to?
We're exporting to about 40 countries around the world. For Europe and America Area ,it takes about 30%,Middle East area:40%, Africa area:30%.
III. If you can do valve in our brand?
Yes,we can do your brand,but need you to provide the certificate of authrization for us.
IV. Where is your factory ?
Our factoury is located in Wenzhou city. If you have time ,welcome to visit us!
V.Which delivery port do you usually use?
There are three port we usually use:Shanghai pot,ningbo port,Wuhu port.
VI,What kinds of certificates do you have?
We have ISO9001:2000 quality certificates,3A certificatesand ISO14001:2014