700kw BIOMASS Generator with Standard Container Canopy&CHP SystermCW-700GFJKgas engine driven by Z12V190ZLDK gas engine, which is a rigid, highly efficient and proven gas engine for gas application.
The gas engine and alternator are mounted on the same skid, and the alternator is elastically coupled to the flywheel of the gas engine.
3. Technical parameters3.1CW-700GFJTechnical Data of Genset ManufacturerShandong ChaiweiPower Equipment Co., LtdGenset modelCW-700GFJKEngine modelZ12V190ZLDKAlternator model1FC6 454-6LA8Field control panelPFT-700Speed regulation governorUSA WoodwardControllerComApIgnition systemAltronicPrime powerkW700Continuous powerkW500Rated voltageV230/400Rated power factorcosφ0.8 (lagging)FrequencyHZ50Fuel gas consumptionMJ/(kW·h)≤9.8Lubricant consumptiong/(kW·h)≤1.0Start-up methodDC 24V Electric motorStart-up controlManual/AutomaticWiring method3 phase 4 lineStable speed droop%≤5Cooling methodOpen loop type, or Closed loop with fan radiatorExhaust back pressure max.6 kPaNoise level75db @ 1 meter away from the genset
34 db @ 1 meter away from engine mufflerGenset vibration≤7.2mm/sCoupling between engine and alternatorElastic couplingDimension (LxBxH)mm5600x2100x2335Weightkg12500 Worksite requirements:
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 2500m;
d) For outdoor installation, simple rain shelter is requiredFuel gas requirement:The genset will be able to output at its full power with fuel gas with the specification as below:1m from genset's pressure regulating valve of inlet
Temperature of biomass≤40ºC;
Pressure of biomass 5~20kPa, velocity of pressure≤ 1kPa/min;
H2S≤200mg/Nm3;
NH3≤20mg/Nm3;
Coke tar content≤20mg/Nm3;
Impurities particle size≤5μm; impurity content≤30mg/Nm3;
Moisture Content of biomass ≤40g/Nm3;
Biomass calorific value≥4.2MJ/Nm3.
Purification of biomass gas has a significant impact on machine life and continuous running time!