metal Insulator Side Ties/ Distribution Guy Grips
Description:
Single line/top ties are intended for securing bare conductors into the top groove of insulators. On vertically-mounted insulators, single lineties/ top ties can normally accommodate line angels of up to 10 depending on insulator orientation.
Material:Aluminum-clad steel with an elastomer pad
Mechanical:Single line ties/top ties will develop unbalanced and lift-off loads equivalent to , or in excess of, a hand tie over covered conductor. When installed with a pad on bare conductor, single line ties/top ties provide superior protection against abrasion and all types of conductor motion. The pad is a resilient cushion at the point of contact between conductor and insulator.
Insulators:Φ57mm (C Neck), Φ73mm (F neck) and Φ89mm (J neck)
Applicable conductor: ACSR, All-Aluminum, Aluminum Alloy and etc ..Technical Datasheet:ModelOuter diameter (mm)Color codeApproximate length (mm)C Neck (Φ57mm)F Neck (Φ73mm)J neck(Φ89mm)MinMaxC Neck F Neck J neck14.3mm minimum groove radiusSDB-57-5460SDB-73-5460SDB-89-54604.835.46Blue610635660SDB-57-6200SDB-73-6200SDB-89-62005.496.20Brown635660685SDB-57-7040SDB-73-7040SDB-89-70406.227.04Orange660685710SDB-57-8000SDB-73-8000SDB-89-80007.068.00Purple660735760SDB-57-9070SDB-73-9070SDB-89-90708.039.07Red710785815SDB-57-1029SDB-73-1029SDB-89-10299.0910.29Yellow760815840SDB-57-1166SDB-73-1166SDB-89-116610.3111.66Blue635660685SDB-57-1321SDB-73-1321SDB-89-132111.6813.21Orange635685710SDB-57-1494SDB-73-1494SDB-89-149413.2314.94Red710735760SDB-57-1689SDB-73-1689SDB-89-168914.9616.89Purple760815840SDB-57-1918SDB-73-1918SDB-89-191816.9219.18Brown785815840SDB-57-2172SDB-73-2172SDB-89-217219.2021.72Red81584086515.9mm minimum groove radiusSDB-57-2459SDB-73-2459SDB-89-245921.7424.59Blue86589091519.1mm minimum groove radiusSDB-57-2784SDB-73-2784SDB-89-278424.6127.84Green940965990SDB-57-3150SDB-73-3150SDB-89-315027.8631.50Yellow101510401065DetailedImage:
Installation Guide: