HOWO Truck Chassis 100m-400m rig drilling water truck

HOWO Truck Chassis 100m-400m rig drilling water truck

Main features:

HTC200DF truck mounted drilling rig need to use couple with air compressor. This truck chassis could beadopt the 4x2 , 4x4 and 6x4specialchassis of brand SINOTRUK, FAW, DONGFENG, 11.00R20 steel off-road tire tread,with good off-road performance.

This rig has very compact structure, the engine ofchassis could be adopted 180hp,210hp,240hp,270hp,290hpdiesel engine, the engineis made by SINOTRUK,FAW,DONGFENG.The drilling rig has independent diesel engine (FAW DEUTZ-WP6G125E22), the power is 92kw. Not only meet the drilling requirements, but also reduce energy consumption, it is very affordable.

This rig is design principle is an advanced hydraulic cylinder for drilling, stepless lift, it can be achieved automaic drilling. it can automatically adjust the drilling speed for different geological conditions.

The drilling process can be achieved in pressruized drilling technology, adjust different pressure for different geological conditions, and can be viewed drilling pressure by pressure gauge. At the same time, it can adjust the drilling speed.

The drilling rig can achieved fast drilling by manually, especially for soil. It can achieved different speed for different soil.

It has a large lifting force hydraulic main hoist, stepless lift, and to achieve release rope quickly. When upgrading heavy, the lifting speed need slow to aviod crash the turntable and wellhead board. When put down single drill pipe, operate the quick handle, it can achieved release rope quickly like mechanical hoist.

It has a hydraulic tool hoist, the tool hoist has large lifting force and quick lifting speed, it is both easy to loading drill tools, drill pipe and drill accessories transport, and can slide up and down with anchors, its very convenient to load and unload the drill pipe.

It has a hydraulic cylinder control double card board forward and backward, it makes the insurance card board closed, to achieve stuck or release the pipe joints.

It use integrated design of pneumatic, to achieve the BW850/2A mud pump clutch using pneumatic remote control, it has high degree of automation and easy-saving operation.

It is installed 4 hydraulic legs and 2 mechanical legs, every hydraulic leg rod with locknut. After leveling the rig, it can lock the cylinder use locknut. So, even if the cylinder leaks, the chassis is not instability.

The turntable use stir bars, internal turntable use spiral arc gear to transmission, it has large torque, it about 2 times of similar products at domestic and foreign.

It also could be installed a generator (30kw) instead of the independent engine, so that it is convenient to illuminate or work at night.

The hydraulic system use open system, the chassis and drilling rig are separately manipulated, it can avoid misuse. Winter oil heater and summer oil radiator are installed, to adapt to different seasons hydraulic oil for heating and cooling.

This drilling rig equipped with an auxiliary unloading cylinder, it can be used to promote the turntable ratchet, to achieve auxiliary unloading the drill pipe.

Drive wheel6x4ModelWD615.69Maximum output290HPEmission standardEuro IINumber of cylinder6-cylinder in-line with water cooling, turbo-charging and intercooling TransmissionHW15710 10 forward speedFront AxleHW7 7TRear AxleST16 (rate:5.571) 2x13Tframe300*90*8+8mmFuel tank260L aluminum alloy tankWheel base(mm)4350+1350Wheels&TiresTire:12R22.5-16 Model, descriptionHW76/ H17Air ConditionerYesOperating voltage24vStarter, AlternatorChina brandOverall Length10573mmOverall Width2596mmOverall Heigth3790mmMax. deepth100m/150m/200m/300m/400m The hole diameter100-300mm The drilling rod length3000mm/4500mm/6000 mm The drilling rod diameter76-108mm Work pressure1-3.45MP Air flow16-35 m3/minute Shaft pressure7 tons Lifting capacity15 tons Rotary torque4000-7000 N.m Rotary speed0-80rpm