For G-WIT® honeycomb panels, its core layer uses low volume density and high strength materials such as PP honeycomb core while continuous fiber-reinforced thermoplastic stratified materials (CFRT, especially, glass fiber reinforced polypropylene sheets) are used for the surface layer. it is a 100% environment-friendly new liPost-Press Equipment ghtweight material. With a "sandwich" structure, such boards are fabricated by thermoplastic composition. it is widely used in numerous fields because of its ease of processing.The specifications of current G-WIT® honeycomb panels: JW3-10,JW3-15,JW3-20,JW3-25,JW3-30,JW3-40etc.; thickness: 6-60mm. In addition, customized needs of different clients can be met by special processing such as surface film-coating.ParametersPre-Press Equipment Test itemsJW3-15-010-001JW3-20-010-001JW3-25-010-001JW3-40-010-001Thickness mmRemote Control 15202540Mass per unit area Kg/m²3.183.744.125.26Compression strength
GB/T 1453-20051.71.71.551.7Compression modulus MPa
GB/T 1453-200565566083Bending strength MPa
GB/T 1456-20051914117Maximum bending load N
GB/T 1456-2005823100613742186Peel load N
GB/T 1457-2005>1500>1500>1500>1500Peel strength N/cm
GB/T 1457-2005>240>240>240&Wheel & Caster gt;240
Product characteristics
1.Low density and light weight
The density of G-WIT®honeycomb panelis 1.4g/cm3. Comparing to the 2.2g/cm³ of GRP, the 7.85g/cm³ of steel plates and the 2.7g/cm³ of aluminum plates, it's clear that the density of G-WIT® cellular board is the lowest, thus trucks of the same size is lowest in weight if G-WIT® honeycomb panels are used for the truck box.
2.Impact strength
Falling ball impact test on 20mm-diameter ball showed the maximum impact strength is 250J/m² under room temperature and >35 J/m² under -20°C.
3.Favorable bending properties
A span of 600mm G-WIT® honeycomb panel, 15mm thick and 100mm wide, can withstand thManipulator e pressure of 5kg without deformation or fracture. Comparing with materials such as colored steel laminboards, plywoods and GRP, our boards showed the best bending properties.
In addition, G-WIT® honeycomb panels are also easy to assemble, highly resistant to weather (suitable for use from -40°C ~ +80°C), waterproof, moistureproof and highly resistant to chemical erosion.