China Waste Gas Treatment Spray Cleaning Tower

Spray cleaning tower
1.structure typeThe device is divided into a single tower body and a double tower body. It adopts a circular tower body and is connected bSignal Filter y flanges. Specifically, it consists of a liquid storage tank, a tower body, an inlet section, a spray layer, a packing layer, a turbulent defogging layer, an inspection window,Energy Saver and an air outlet.Equipment principleFor the treatment of corrosive gases (such as acElectrical Control System id and alkaline waste gas), liquid absorption is currently used for treatment. The key to the disposal of the waste by liquid absorption is the choice of purification equipment. At present, our company has independently developed acid and alkaline waste gas purification proceSmart Card & Card Reader sses and equipment with high purification efficiency, simple operation and management and long service life. The process and product combine the advantages of similar purification towers at home and abroad, multi-stage rotary spray and absorption, and optimize the technical parameters of the packing layer and the tower body, with simple structure, low energy consumption, high purification efficiency and applicable range. Wide range of features, can effectively remove hydrogen chloride gas (HCL), hydrogen fluoride gas (HF), ammonia (NH3), sulfuric acid mist (H2SO4), chromic acid mist (CrO3), hydrogen cyanide gas (HCN), alkali vapor (NaOH ), a water-soluble gas such as hydrogen sulfide gas (H2S) or formalin (HCHO). The acid mist exhaust gas is introduced into the puCustomized Service for Machinery rification tower by the air duct, passes through the packing layer, is discarded and the sodium hydroxide absorption liquid is fully contacted by the gas-liquid two phase to absorb the neutralization reaction, and the acid mist exhaust gas is purified, and then dehydrated and defogged by the defogging plate. The fan is discharged into the atmosphere, and the absorption liquid is sprayed at the top of the tower after being pressurized by the water pump at the bottom of the tower, and finally returned to the bottom of the tower for recycling. The evolved acid mist exhaust meets emission requirements and is lower than national emission standards.FeaturesThe equipment adopts packed tower to purify the exhaust gas, and is suitable for the treatment of continuous and intermittent exhaust gas; the process is simple, the management, operation and maintenance are quite convenient and concise, and will not have any impact on the production of the workshop; the scope of application is wide, and the purification can be simultaneously Contaminant; low pressure drop, high flexibility, and good defogging performance; tower body can be made of FRP/PP/stainless steel according to actual conditions; the packing adopts high efficiency and low resistance Pall ring. Thoroughly remove odors, harmful substances, etc. from the gas.