China Coating Machine Powder Machine Modifier

1. Completely overcome the problem of false agglomeration
The samharsurface coatingmachine have their own adjustment wheel system, the agglomerated particles can be directly returned to reactivate, so the false agglomeration problem of mixermachines is completely overcome.If use mixer machine, due to the problem of agglomeration, it is haveto use an air flow sieve for classification and scattering.
2. Activation rate can be regulated
The height of the activation chamber is higher than that of the general modification machine, and the volume of the chamber is large, and the classifier can reactivate the powder with lower activation degree back to the activation chamber for activation. The activation rate is controlled by adjusting the rotation speed of the adjustment wheel. Therefore, the activation rate of the ourmodified activation machine is controllable, and the actual effect is good. The activation rate of non-metallic mineral powders such as heavy calcium, light calcium and wollastonite is as high as 99%, and the activation rate of special raw materials such as white carbon black can be as high as 96% .
3. The activation principle is more advanced
The rotor not only activates and stirs the powder itself, but also acts as a fan to rotate the wind flow to form numerous powerful eddy currents, allowing the powder to collide with each other in a large space to be fully rubbed and activated. This has three advantages, one is to improve efficiency, the activation degree is better; the second is to save energy and increase production; the tSecurity & Protection hird is to reduce the loss of wearing parts such as blades and save costs.Technical ParameterModelGX-420GX-700GX-1000Diameter(mm)4207001000Filler3*23=695*23=1159*29=261Ash Cleaning WayOff LineOff LineOff LinePower(kw)Grinder223045Classifier37.515Wind Blower7.518.555Total power(kw)32.556115Output(kg/h)600~10001500~25003000~4500RemarkThe output is depending on the activation rate requirements.
1.what is kind of the raw material do you want to process?
2.what is the capacity per hour do you require?
4.what is the agnet do you use?
Uponsales /confirm/iation,wewillofferthefollowingtechnicalservices:
1.Designforyourproductionlineflowandequipmentlayout,freeofcharge;
2.Providefoundationdrawingsofcustomer-orderedgrindingmillsanddrawings ofrelatedparts,etc;
3.Technicalparametersofperipheralequipmentwillbesupplied;
4.Freetechnicalsuggestionsonadjustingofequipmentlayoutandapplication.
5.Equipmentupgrading(customersneedtopaythecost)
1Electromagnetic Equipment .StrictlyconformingtoISO9001-2000qualitymanagementsystem;
2.Strictcontrolfrompurchasinginspection,processinspectioAlarm & Security Systems ntofinalproofing;
3.EstablishedseveralQCdepartmentstoexecutequalitycontrolregulations;
4.Detailedqualitycontrolexamples:
(1)Completefilesforqualitycontrolandqualityfeedback;
(2)Strictinspectionforthecomponentsofourgrindingmills,toassureproductsfreeofdamageandavoid rust-eatenandpaintpeelingofflateron.
(3)Onlyqualifiedcomponentswillbeassembledandtotalequipmentmustbeinspectedcompletelybeforesale.
1.Wewillsendourtechniciantothesiteforguidingequipmentinstallationandcommissioning.
2.DuringtheinstallationPetroleum Equipment & Machinery andcommissioning,weofferoperatortrainingservice.
3.ThequalityassurancedateisoneyearaftercommissiMachinery Stocks oning.Andafterthat,wewillcollectthecostifproviderepairingforyourequipment.
4.Maintenanceforequipmentfailurecausedbyimproperhandling(appropriatecostwillbecollected).5.Weofferthecomponentswithfavorablepriceandperdurablemaintenance.
6.Ifequipmentrepairingisneededafterqualityassurancedateisexpired,wewillcollectmaintenancecost.