Business Type:
Manufacturer/Factory,Trading Company
Business Range:
Electrical Power Quality Improvement Low-Voltage Series Products, Electrical Power Quality ..
Establishment:
2002
R&D Capacity:
OwnBrand
Terms of Payment:
LC, T/T, WesternUnion
Main Markets:
Southeast Asia, Middle East, Africa, Domestic
OEM/ODM Service
Sample Available

Power Factor Correction, Statcom, Svg manufacturer / supplier in China, offering 0.4kv Svg Module to Compenste Capactive and Inductive Reactive Power (statcom), 11 Kv Cgis Rating 31.5 Kv / 3 Sec Test Top Connection of Bus Bar for Panel to Panel in ABB Vacuum Interrupter, Q Type CB Rmu Managing 800 a at 50 Deg C 1250 a Busbar Sf6 and Dry Air Insulation Gis AIS and so on.

1
    YRS
General Supplier
Supplier Homepage Electrical & Electronics Power Supply & Distribution Power Distribution Cabinet 0.4kv Active Power Filter for 2-50th Harmonics for Non-Linear Loads

0.4kv Active Power Filter for 2-50th Harmonics for Non-Linear Loads

Get Latest Price
Min. Order / Reference FOB Price
1 Piece Contact Supplier
Local Area: Shenzhen, Guangdong, China
R&D Capacity: OEM, ODM, Other
Payment Terms: LC, T/T, WesternUnion
Brand: Sanhe
Type: Power Quality Improvement
Structure: Easy Installation
Certification: ISO9001:2000

The active power filter (APF) is mainly composed of controller, isolation switch (circuit breaker), contactor, IGBT, driving circuit, protection system, fuse, connection reactor, DC capacitor, etc. The controller measures phase A, C reactive power(current), produces control signal, drives IGBT on/off and produces harmonic and reactive current same as system harmonic current but in opposite phase to filter system harmonic, reduce reactive power and keep system power factor approximately at 1.
Our APF equipment is module structure,there are two types Wall Mounted and cabient mounted.The Wall Mounted type is preferred to be used in equipment improvement which is very convenient to install.
It is suitable for any non-linear loads like:
softstarter
UPS,Inverter,EV charger etc
Lift,welding machine,control motor
Electronics data handle,IDC
Lights
Main Parameter
Rated voltage: 0.4kV
Frequency: 45Hz ~ 63Hz
Efficiency: 97%
Filtering capacity: THDi (current distortion rate) < 5%
Response time: less than 15ms
Communication interface: RS485, network port
Communication protocol: the power of the general protocol, Modbus protocol, TCP/IP
Protection grade: IP20, the remaining IP grade can be customized
APFM Module -type Feature
Compact and reasonable structure, flexible installation.
Advanced control algorithm, software reliability.
Double DSP control system, using vector screening technology.
Dynamic filter 2 to 50 harmonics, may optionally specified harmonic filter.
Harmonic compensation, reactive power compensation and three-phase unbalance compensation.
Various capacity module, arbitrary combination and capacity expansion machine, good performance, to meet the different needs of the system capacity.
Standard communication interface and communication protocol.
Fault alarm and recording function, can be as much as 500 alarm records.
With all kinds of complete and effective protection measures, such as over-voltage protection, under voltage protection, short circuit protection, inverter bridge reverse protection, compensation protection etc.
Load change process, if the resonance, APFM self judgment and exit systemProduction Line