Business Type:
Manufacturer/Factory
Establishment:
2012
R&D Capacity:
ODM, OEM, Other
OEM/ODM Service
Sample Available

GSM Repeater, Repeater, Signal Repeater manufacturer / supplier in China, offering 23dBm 75dB GSM900MHz Amplifier Dcs1800 WCDMA2100 Triple Band Cell Phone Booster 3G 4G Lte Mobile Signal Repeater with LCD Display, UHF 100W RF Power Amplifier/PA Module/RF Amplifier Module/High Power Amplifier, 135-175MHz 100W RF Power Amplifier and so on.

1
    YRS
General Supplier
Supplier Homepage Electrical & Electronics Telecommunication & Broadcasting Repeater 20watts 95dB GSM 900MHz Amplifier 3G 2100MHz Mobile Signal Repeater 4G Lte 800MHz RF Cell Phone Sign

20watts 95dB GSM 900MHz Amplifier 3G 2100MHz Mobile Signal Repeater 4G Lte 800MHz RF Cell Phone Sign

Get Latest Price
Min. Order / Reference FOB Price
1 Piece Contact Supplier
Local Area: Shenzhen, Guangdong, China
R&D Capacity: OEM, ODM, Other
Payment Terms: LC, T/T, PayPal
Type: Signal Repeater
Transmission Medium: Cable
Standard: Standard
20W 95dB GSM 900MHz 3G 2100MHz RF cell phone repeater Mobile Signal booster
We can also make other single band repeater as customer,feel free to contact us for your requirement!IntroductionRF Repeater is designed to enhance cellular network coverage and fill blind spots. Main operation of the repeateris to receive low-power signal from base Station (BS) via radio frequency (RF) transmission by its donor antenna,process, amplify and forward the signal to Mobile Station (MS) in target coverage area by its service antenna.Features1.Aluminum alloy enclosure for excellent heat dissipation,waterproof design for all-weather installation;2.metal cavity filter technology inside, which gives wider receiving and sending separation, better gain flatness, higher stability, and lower noise figure;3.Modules structure,full-duplex & dual-port design, and built-in power supply,easy for maintenance and installation;4.High linearity PA; high system gain;5.Allowing for continuous gain adjustment 31dB by 1dB step;6.ALC technology used to provide auto amplitude fixing;7.Press-key , Local PC GUI operation and Optional Remote Modem control.RF Repeater Typical Application
Specifications UplinkDownlinkWorkingFrequencyCDMA850824 ~ 849 MHz869 ~ 894 MHzGSM850824 ~ 849 MHz869 ~ 894 MHzGSM900880 ~ 915 MHz935 ~ 960 MHzDCS1710 ~ 1785 MHz1805 ~ 1880 MHzPCS1850 ~ 1910 MHz1930 ~ 1990 MHzWCDMA1920 ~ 1980 MHz2110 ~ 2170 MHzAWS1710 ~ 1755 MHz2110 ~ 2155 MHzLTE700 MHz( A, B, C, D band optional)2500 ~ 2550 MHz2620 ~ 2670 MHzOutputPower/2730/33/37/40dBm33/37/40/43/47dBmGain85dB95dBIn-BandRippleGSM≤3dBDCS≤5dBWCDMA≤5dBVSWR≤1.5:1Threeorderintermodulation≤-45dBcGainadjustmentaccuracy0-10dB≤1dB10-20dB≤1dB20-30dB≤1.5dBSystemDelay≤5usRejectionbandFo±0.4MHz≤-25dBmFo±0.6MHz≤-35dBmFo±1MHz≤-48dBmSpuriousEmission9KHz~150KHz≤-36dBm/10KHz150KHz~30MHz≤-36dBm/100KHz30MHz~1GHz≤-36dBm/100KHz1GHz-12.75GHz≤-30dBm/1MKHzNoiseFigure≤5dBI/OImpedance50ΩRFConnectorN-Type(Female)Frequencyerror≤±5x10¯8Radio Equipment Directive2014/53/EUElectromagneticcompatibilityTotheETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-3 V2.1.1standardPowerAC110V or AC220VTemperatureRange-25ºC~+55ºC Humidity≤95%Size470x315x230mmWeight20kg
Schematic
Working principle:
When the repeat antenna receives uplink signals from asubscriber, the signals will undergo processing of low-noise amplifier, filter and power amplifier first, and then be transmitted to the base station, thus accomplishing connection between subscribers in signal blind area and base station.In this way, the blind areas are eliminated.Considering receiving signal intensity and coverage size may vary with sites where repeater is located, it is necessary to control the gain and output of the repeater.Additionally, considering the fading effect in spatial signal transmission, auto amplitude fixing for output is required.For this purpose, MGC and ALC circuits are included in the uplink/downlink channels.Site SurveyBefore you install, the installer should contact the person responsible for the project, understand whether there are installed conditions in the installation site.Specifically include: Installation site, surroundings (Temperature and Humidity), power supply, and so on. If qualified, should go live on-site survey with related personnel. The repeater is designed that can working outdoors, operating temperature is -25ºC~65ºC, humidity is ≤95%, which can be adapted to most areas of the natural environment.Recommended Environmental Requirements:1.Installation area non-corrosive gases and fumes, Electromagnetic interference field strength ≤140dBμV/m(0.01MHz~110000MHz).
2.Mounting height should facilitate the RF cable routing, cooling, safety and maintenance.
3.Should provide a set of independent and stable 150VAC~290VAC(Nominal 220V/50Hz)AC Power. It must not be shared with other high-power appliances telecommunications equipment.
4.Lightning protection devices must be installed in the building, and it should have sufficient strength and stability.
5.There are grounding bar in the vicinity.Installation ToolsInstallation tool to use: Electric impact drill, iron hammer, pulleys, ropes, belts, helmets, ladders, screwdriver, hacksaw, knife, pliers, wrenches, compass, measuring tape, tweezers, electric iron, portable PC, 30dB directional coupler, spectrum analyzers, VSWR tester.Repeater installationIt can be holding pole or wall mounting way. It should be installed in ventilated place, vertically on a wall or mast to ensure good heat dissipation, if hang on the wall, the upper part of the equipment to be considered more than 50cm from the ceiling, the lower part of the equipment needs more than 100cm from the floor.Antenna and Feeder Installation and Precautions1.Installation of antenna systems requires experienced professionals to complete.
2.You can not install an antenna near power lines, which may be life-threatening.
3.All exposed joints must use self-adhesive waterproof tape and electrical insulation tape seal securely.Connect the Ground and Power Supply1. Equipment Grounding
The equipment must be well grounded, there is a copper on the repeater wall chassis ground, use 4mm2 or thicker copper wire close to the ground. Grounding wire should be as short as possible. When installed, the equipment grounding wire should be connect to the integrated grounding bar. Grounding resistance of requirements bar may be≤ 5Ω, ground connector require preservative treatment.
2. Connect the Power
Connect 220V/50Hz AC power to the equipment power port terminal blocks, power line use 2mm2 cables, length less than 30m. For standby power requirement, the power must go through UPS, and then connect the UPS to the repeater power port terminal blocks.For more details,feel free to contact us!