3G UMTS 2100MHz Band-Selective Pico Repeater

Specifications of WCDMA2100 Band Selective Pico RepeaterThe Pico Repeater provides an affordable solution to solve the indoor signal coverage problems due to signal fading and attenuation caused by architecture obstacles. And its easy installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It picks up the strongest signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Indoor Signal Distribution System to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
The Pico Repeater can amplify the signal within the customized band.
FeaturesTwo signal ports with full duplex design
High system gain
Linear power amplification to effectively suppress inter-modulation and spurious emission
Smart Automatic Level Control (ALC) ensures output level stable and adjustable continuously
Unique color LEDs to indicate power supply and state and alarm
Simple installation with external AC/DC adapterApplicationsTo expand signal coverage or fill signal blind area where signal is weak or unavailable.Indoor:Hotels, exhibition centers, basements, shopping malls, offices, parking lots, …
Application Diagram
Technical SpecificationsItemsSpecificationFrequency Range (customized)Uplink1920~ 1980 MHzDownlink2110~ 2170 MHzWorking Bandwidth (DL Selective)Customized W/B from 60 MHzGain Uplink≥70±3dBDownlink≥75±3dBOutput Power(customized)20/27dBmManual Gain Control≥25dBAGC control range≥20dBMax. Input Power Without Damage≤0dBmIn-Band Ripple≤10dBVSWR≤2Group delay time≤ 1μsI/O Impedance50 ΩNoise Figure≤8dBSpurious EmissionWithin working band≤ -15dBm/30kHzOut of working band
(f> 2.5MHz)9kHz~1GHz: ≤ -36dBm/30kHz
1GHz~12.75GHz: ≤ -30dBm/30kHzError Vector Magnitude (EVM)≤ 12.5%Peak Code Domain Error (PCDE)≤ -35dBmRF ConnectorN-Type (Female)Power Consumption≤ 25WPower SupplyAC100~ 240V Dimensions190*297*78mmWeight4 kgAlarm Monitoring SystemAlarm for uplink self-oscillationIndication LEDPower supply, Alarm, stateOperating Temperature-10 ~ +50 °CIP RatingIP30Humidity≤95% Product Description
It supports wall mounting installation, follow the instructions below.
First of all, choose a mounting position for the Pico Repeater in indoor environment. And then align Pico Mounting hole on the wall and be markedAccording to formerly marking on the wall to drill the holes, and inserted the rubber plug in the holes.Use screws fix the Pico's mounting hole on the wall where Pico is going to be installed.The BTS port on Pico Repeater is connected to the donor antenna, MS port is connected to the service antenna.System is supplied by AC220V power via connection of the external extension power cable.The system works properly under the condition of having enough system isolation.With obstruction or no, it must ensure the distance of 5-30 m between the donor antenna and service antenna.