Automatic Vacuum Hopper Loader for Suction and Conveying Plastic Particles

Single-phase Hopper loader / Suction FeederHADR DEGA single phase suction feeder (HA Series) can rapidly transport the plastic particles to the hopper of molding machine, drying barrel,or storage bin ; the right material conveying can ensure the continuous operation of the molding machine and avoid unnecessary stop. Reduce the waste of raw materials, reduce labor input, ensure the workplace clean and safe.Horizontal vacuum suction stronger, more energy efficient; equipped with thermal protection, when the body temperature exceeds 70 degrees, the pump automatically shutdown protection; unique brush protection, automatic monitoring of the use of brushes and save time; when the brush is exhausted automatic separation of carbon brush motor rotor, avoid contact with the rotor iron brush damage the motor; uses a unique dual bypass protection, to avoid overheating caused by clogged filter bag.Using a large bag designs. Ventilation volume is 2-3 times of other brands, effectively reducing the workload of the vacuum pump, vacuum pump to extend the life of; bag imported antistatic treated polyester material, compared to the long life and reduce paper bag late bag replacement costs; using bag vibration system. Through the stainless steel filter bag vibrator up and down vibration, dust filter bag is vibration out and fall vertically; without the use of compressed air, can save energy and compressed air to prevent moisture contact material.SpecificationsModelHA-80HA-180Effective volume(Lt)714Standard feeding capacity(kg/h)40-8070-180Max feeding capacity(kg/h)100200Feeding pipe diameter Φmm40-5040-50Fan high temperature protectionYesYesCan be used in CBE systemYesYesFilter formFilter bagFilter bagThe filter bag cleaning systemJet typeVibration typeVPA proportional valve control
VPAYesYesFan power(KW)1.151.15Power supply (V/HZ)240/50-60240/50-60Dimensions(mm)A555720B275325C222285D174215The max weight(kg)
9.2511.25
Single-phase Suction Feeder advantages:
• Proven HADR DEGA product quality, reliable operation can be achieved without fault
• It is the first step towards realizing efficient, automated production
• Automatic material shortage alarm, ensure that the molding machine will not dry run because of material shortage
• Intelligent automatic filter cleaning function
• By HADRDAGA proportional valve, add feedback automatically and suspending stir according to the proportionCost down :
• No material scattered, neat production sites, raw material saving at least 1~2% to avoid the waste of raw material
• Save labor, without manual for molding machine feeding
• 304 stainless steel structure, long service life, low maintenance rate
• When changing to the central feeding in workshop at later stage, only need to replace the