Carbide Turning Inserts with CVD Coatings

We are a professional manufacturer of Caride Inserts, and can supply you with kinds of ISO standard and special standard Carbide Inserts, including Turning Inserts, Milling Inserts, Threading Inserts, as well as Scarfing Inserts.All Inserts are made by special grade powder;
Depressed sintering technology for fine densification;
Substrates are excellent in resistance to crater wear, thermal shock;
Advance CVD coating technolog for extended tool life.TheTurning Inserts also can be made according to your own specification. Please feel free to contact us for details.CVD Coated Grades are as follows:Grade
Description
Equivalent to ISO
JCP1015
MT-CVD coated, the substrate with excellent wear resistance in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for finishing of steel.
P05~P15
JCP2015
MT-CVD coated, Cutting edge with good toughness in combination withTiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for semi-finishing of steel.
P10~P25
JCP3015
MT-CVD coated, the substrate with excellent toughness and plastic deformation resistance in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for roughness of steel.
P20~P35
JCM1015
MT-CVD coated, the substrate with excellent wear resistance in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is optimal for finishing and semi-finishing of stainless steel.
M05~M15
JCM2015
MT-CVD coated, the substrate with special micro structure in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is optimal for finishing and roughing of stainless steel.
M10~M25
JCM3015
MT-CVD coated, the substrate with excellent toughness in combination with TiCN+Al2O3(thin)+TiN multi-layer coating, which is optimal for semi-finishing and roughing of stainless steel.
M20~M35
JCK1025
MT-CVD coated, the super fine grain size substrate with excellent hardness in combination withAl2O3(extra thick) + TiCN(thick) coating, the smooth surface, which is suitable for turning and milling of grey cast iron at high speed
K05~K15
JCK2025
MT-CVD coated, the substrate with excellent hardness and stripping resistance in combination withAl2O3(thick) + TiCN(thick) coating, the smooth surface of the tools, which is suitable for turning and milling of cast iron at middle and high speed.
K10~K30
JCK3025
MT-VD coated, the substrate with excellent wear resistance and toughness in combination withAl2O3(extra thick) + TiCN(thick) coating, which is suitable for the milling of cast iron(for example, nodular iron) at middle and high speed and interrupted turning.
K20~K35