China 2 Phase NEMA23 Stepper Motor Stepper Motor Driver

2 Phase NEMA23 Stepper Motor and Stepper Motor Driver
1.8° 57mm Hybrid Stepper Motor-NEMA23
Genaral Specification:
Step Angle ------------------- 1.2° ± 5%
Temperature Rise ------------- 80° Max
Ambient Temperature -------- -20° ~+50°
Insulation Resistance--------- 100 MΩ Min., 500VDC
Dielectric Strength: ------------ 500VAC for 1minute
Shaft Radial Play --------------- 0.02Max. (450g-load)
Shaft Axial Play ----------------- 0.08Max. (450g-load)
Max. Radial force----------------- 28N (20mm from the flange)
Max. Axial force------------------- 10NModel No.
Featured product
NEMA23 STEPPER MOTOR

Model No.Step AngleMotor LengthCurrent
/PhaseResistance
/PhaseInductance
/PhaseHolding TorqueLead wiresDetent TorqueRotor InertiaMotor
Weight( °)(L)mmAΩmHN.mNo.g.cmg.cmKgJK57HS41-10061.84115.25.50.3962501500.47JK57HS41-20061.84121.41.40.3962501500.47JK57HS41-30061.84130.630.60.3962501500.47JK57HS41-28041.8412.80.71.40.5542501500.47JK57HS51-10061.85116.68.20.7263002300.59JK57HS51-20061.85121.652.20.7263002300.59JK57HS51-30061.85130.740.90.7263002300.59JK57HS51-28041.8512.80.832.21.0143502800.68JK57HS56-10061.85617.4100.963502800.68JK57HS56-20061.85621.82.50.963502800.68JK57HS56-30061.85630.751.10.963502800.68JK57HS56-28041.8562.80.92.51.2643502800.68JK57HS76-10061.87618.6141.3566004401.1JK57HS76-20061.87622.253.61.3566004401.1JK57HS76-30061.876311.61.3566004401.1JK57HS76-28041.8762.81.133.61.8946004401.1JK57HS82-30041.8823.01.242.2410006001.2JK57HS82-50041.88250.61.52.2410006001.2JK57HS112-30041.81123.01.66.82.8412008001.4JK57HS112-42041.81124.20.93.82.8412008001.4
Matched driver JK1545

Characteristics:
1.DC power input type:24V~50VDC
2.Output current:1.3A-4.5A
3.Mircostepping:1(1.8º) 1/2 1/4 1/8 1/16 1/32 1/64 1/128 1/256
1/5 1/10 1/25 1/50 1/125 1/250
4.Protect form :Overheated protect, lock automatic half current ,error connect protect
5.Dimensions:118mmx76mmx33mm
6.Weight:<350g.
7.Working environment:Temperature-15~40ºC Humidity<90.
I/O Ports:
1.VCC+:DC power positive pole
Note:Must guard against exceeding 50V, so as not to damage the module
2.GND:DC power cathode
3.A+ A-:Stepping motor one winding
4.B+ B-:Stepping motor other winding
5.PUL+ PUL -:Stepping pulse input+5V (Rising edge effective,rising edge duration >10μS)
6.DIR + DIR-:Stepping motor direction input, voltage level touched off,high towards, low reverse
7.ENA+ ENA-: motor free
NOTE:
1.When ambient temperature is high or working current over 2.7A, fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time.
2.Half current automatically: if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric
3.The fault phase is protected: When the double-phase electrical machinery is connected with driver, users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small.Please check whether the wiring of electrical machinery is a mistake.
Company Show:
CHANGZHOU JINGKONG MOTOR & ELECTRIC Appliance Co.ltd is a high-tech enterprise that specializes in designing and producing Hybrid Stepper Motor, Gear Motor, Linear motor, Brushless dc Motor, Driver and some related parts.
Our Appliance fields refer to robot, electronic equipment, medical instrument, lighting & audio equipment, 3D printer, texile machine and CNC machine.
All our products have obtained CE certification, compliance with EU ROHS standards.
Welcome Domestic & foreign customers visit and cooperation!