Business Type:
Manufacturer/Factory,Trading Company
Business Range:
Valve, Pump, Pipe Fitting
Establishment:
2001
R&D Capacity:
OEM
Terms of Payment:
LC, T/T, D/P, PayPal, WesternUnion
Main Markets:
North America, South America, Southeast Asia, Middle East, East Asia(Japan, South Korea), Australia
OEM/ODM Service
Sample Available

Diaphragm Valve, Sanitary Diaphragm Valve, Manual Diaphragm Valve manufacturer / supplier in China, offering Sanitary SS304 Pneumatic Diaphragm Valve for Pharmacy, Dn25 Ss 316L Three Way Butterfly Valve with Threaded Ends, Air Release Valve for Pipe Line and Container and so on.

1
    YRS
General Supplier
Supplier Homepage Industrial Equipment & Components Pump & Vacuum Equipment Gear Pump China 316L Sanitary Lobe Pump with Heat Jacket with ABB Motor

China 316L Sanitary Lobe Pump with Heat Jacket with ABB Motor

Get Latest Price
Min. Order / Reference FOB Price
1 Piece US $12500.00/ Piece
Local Area: Wenzhou, Zhejiang, China
R&D Capacity: OEM, ODM, Other
Payment Terms: LC, T/T, D/P, PayPal, WesternUnion
Power: Electric
Type: Normal Line Gear Pump
Applications: Food Processing
316L Sanitary Lobe Pump with Heat Jacket with ABB Motor
Technical specifications:

Product Name:Sanitary Lobe Pump with Heat Jacket 1450 rpm ABB MotorMaterial:SS304/SS316L/1.4301/1.4404Seal Material:EPDM (Standard, FDA approval) Max. Flow:48m3/h / 395 GPMMax.pressure:12bar/ 174PSIMax. working temperature:150 C / 302 FMax. rev:1450 rpmRotor Type:2-leaves, 3-leaves, butterfly, signal butterflyMechanical seal:SIC/SiC/EPDM(Standard)Motor power:0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kwSealing option:Sanitary single mechanical seal/Double mechanical seal with cooling systemVoltage:110V, 220V, 380VMotor frequency50hz/ 60hzSurface treatment:Inner polished and Sandblast outsideAvailably connection:Clamp, Thread Butt weld, FlangeAvailably standard:DIN, SMS, 3A, RJT, ISO/IDFCertificate:3A/54-02 (1580), PED/97/23/EC, FDA.177.2600, ISO9001/2008Application scope: Dairy, food, beverage, pharmacy, cosmetic, etc


Operating principles
The pump basically consists of two lobe rotors which rotate inside the casing without touching each other.
As the rotors rotate, the space between the lobes and the casing is succesively filled with the product which is driven the discharge nozzle displacing a fixed amount of product.
The pumped product forms a continues stream due to the adjusted Space of the lobes and the pump casing thus ensuring an efficient pumping.
Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.
1. As the lobes come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the lobes as they rotate.
2. Liquid travels around the interior of the casing in the pockets between the lobes and the casing -- it does not pass between the lobes.
3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure.
Lobe pumps are frequently used in food applications because they handle solids without damaging the product. Particle size pumped can be much larger in lobe pumps than in other PD types. Since the lobes do not make contact, and clearances are not as close as in other PD pumps, this design handles low viscosity liquids with diminished performance. Loading characteristics are not as good as other designs, and suction ability is low. High-viscosity liquids require reduced speeds to achieve satisfactory performance. Reductions of 25% of rated speed and lower are common with high-viscosity liquids.