China Constant Temperature Tape Testing Equipment

Constant temperature tape testing equipment

1. Temperature Controller: PID control
2. Safety Device: Overheating or power overload protection
Introduction:
Constant temperature tape testing equipment simulates the adhesive tape in hot temperature environment, and the auto-timer records the holding time of adhesive tape with specific load to confirm the effective time of adhension. The timer shall retain the tseting time automatically to assess the durability of adhesive tape in hot temperature enviroment when the tape falling down from the plate.
Constant temperature tape testing equipment Specifications

ModelHD-C525Test Fixture10 groups (Timing independently)Load1 Kg or designatedTimer10 sets, 9999.9 minutes Temperature ControllerNormal Temp.~200 °c, PID controlAccuracy0.1 °cHeating SystemHot Air CirculationSafety DeviceOverheating or electric power overload protection automaticallyMaterialInside: Stainless Steel;
Outside: Advanced steel plate (paint handling)Inside Dimension (LxWxH)45x50x45 cmOutside Dimension (LxWxH)97x65x110 cmWeight105 KgPower1phase, AC220V, 15ADesign CriteriaCNS-11887/11888; PSTC-7; GB/T 4851

The main technical parameters:

Test Fixture 10 groups (Timing independently)Load 1 Kg or designatedTimer 10 sets, 9999.9 minutesTemperature Controller Normal Temp. ~200 ° C, PID controlAccuracy 0.1 ° CHeating System Hot air CirculationSafety Device Overheating or electric power overload protection automaticallyMaterial Inside Stainless Steel;Outside Advanced steel plate (paint handling)Inside Dimension (Lx Wx H) 45x 50x 45 cmOutside Dimension (Lx Wx H) 97x 65x 110 cmWeight105 KgPower AC220V, 15ADesign Criteria CNS-11887/11888; PSTC-7; GB/T 4851

The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.

Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.