China Double-Sided Reflective Aluminum Foil Insulation Aluminum Thermal Reflective Foil Insulation H

Aluminum foil Reflective foil thermal insulation material consists of one or two layers bubble or foam. This style can be used in a variety of applications because of its thin, lightweight properties. The bubble layers creates Maximum R value and Vapor barrier , the reflective foil on both sides allow it to reflect 97% of radiant heat away from a structure on the outside and back into a structure from the insides. This is why it works effectively in both hot and cold climates.

Item NameAluminum foil insulation aluminum foil Air Bubble Foil Insulation for RoofMaterial StructureAL/ VMPET + Bubble +AL / VMPET ;AL / VMPET+ Bubble + White PE filmAL/ VMPET + Bubble + Bubble +AL/ VMPETAL / VMPET+ PE Bubble + EPE + PE Bubble + AL/ VMPETAL / VMPET+ EPE/XPE;AL/ VMPET+EPE+White PE filmAL / VMPET+EPE/XPE + AL/ VMPETLamination film---metalzied alumiunm foil and pure aluminum foilAL / VMPET+ PE + Woven fabric /Solid and perforatedAL/ VMPET+ PE +Woven fabric +White PE film (Solid and perforated)AL/ VMPET+ PE +Woven fabric + PE+AL/ VMPET(Solid and perforated)AL+ PE +Woven fabric +Blue film for Australian market (Solid and perforated)
LOGO PRINTING is also availableAL+PE+fiberglassAL+glue+fiberglassAL+glue+fiberglass+PE+ALMulti-layer insulation, 5 layer, 7 layer, 9 layer, 13 layer, 19 layer, ectPlease note that for all the items, the metalized PET film is also available. We can change the size, density, thickness accordingly, and develop the new items according to your requirements.BubbleDiameter6mm, 9mm(Common),10mm(Common),12mm,15mm,20mm,25mm,30mmBubble Height3mm, 4mm, 6mm, 8mm, 10mmAluminum Thickness7um, 10um, 12um,ectSize/RollNormalsize:1.2m*40m,1.2m*30m,1.2m*20m. 1.22*38.1m, 1.22*30.5m.Maxwidthis2m,lengthcanbecustomizedWeight230g/m2, 360g/m2, 445g/m2, ectReflectivity95%-97% of radiant heatEmissivity0.03 or 0.05WaterVapor100%Fire proofClass Amold and mildewNo growthCorrosionDoesn'tgenerateApplication-50ºC to +80ºCMax R ValueHeat Flow Down(Roof): 14.8m2*k/wHeat Flow Down(Roof): 7.8m2*k/wHeat Flow Down(Roof): 4.9m2*k/w

Technical Data

Double sided Aluminum foil single bubble foil insulation: AL+Bubble+AL

Typical Physical PropertiesThicknessTensile StrengthTear StrengthLengthWidthSqms/Roll3mm(4mm is also ok)11 LB/inch3.5 LB/inOther Tools & Hardware ch40m1.2m48m2Max R ValueHeat Flow Down(Roof)Heat Flow Horizonta(wall)Heat Flow Up(Floor)10.5m2*k/w5.3m2*k/w3.5m2*k/wThermal PerformanceWater Vapor PerformanceFire PerformanceApplication ConditionsReflectivityEmissivityWater proofFire proofTemperature97%0.03100%CLASS A50ºC below zero to 80 ºC

Double sided Aluminum foil doublebubble foil insulation: AL+Bubble+Bubble+AL

Typical Physical Properties of A-2ThicknessTensile StrengthTear StrengthLengthWidthSqms/Roll6mm(8mm is also ok)12 LB/inch4 LB/inch30m1.2m36m2Max R ValueHeat Flow Down(Roof)Heat Flow Horizonta(wall)Heat Flow Up(Floor)12.6m2*k/w6.2m2*k/w4.2m2*k/wThermal PerformanceWater Vapor PerformanceFire PerformanceApplication ConditionsReflectivityEmissivityWater proofFire proofTemperature97%0.03100%CLASS A50ºC below zero to 80 ºC

Double sided Aluminum foil doublebubble & foam foil insulation: AL+Bubble+EPE foam +Bubble+AL

Typical Physical PropertiesThicknessTensile StrengthTear StrengthLengthWidthSqms/Roll10mm(15mm is also ok)14.6LB/inch4.5LB/inch20m1.2m24m2Max R ValueHeat Flow Down(Roof)Heat Flow Horizonta(wall)Heat Flow Up(Floor)14.8m2*k/w7.8m2*k/w4.9m2*k/wThermal PerformanceWater Vapor PerformanceFire PerformanceApplication ConditionsReflectivityEmissivityWater proofFire proofTemperature97%0.03100%CLASS A50ºC below zero to 80 ºC

Other related products

Aluminum Foil EPE/XPE Foam Heat Insulation

Aluminum Foil woven fabric Heat insulation, Radant barrier

Product StructureconstituteDescriptionValue ( Metric)Aluminum FoilPure Aluminum Foil7 MicronAdhesive LayerPolyethylene20 MicronWoven FabricPolyethylene60g/m2Adhesive LayerPolyethylene20 MicronAluminum FoilPure Aluminum Foil7 MicronTypical Physical PerformancePhysical performanceTesting MethodVaRubber Machinery lue ( Metric)QuantitativeBalance135 g/m2 or othersMoisture Vapor Transmission RateASTM E96 PROCESS A1.15NG/ N.STensile strength-VerticalASTM D828300 N/25 MMTensile strength-HorizontalASTM D828200 N/25 MMBlasting strengthASTM D774140 N/(mm)2Low temperature resistanceASTM D1790 4 HOURS@-40ºCMaintain soft, no stratificationHigh temperature resistanceASTM D1790 4 HOURS@+116ºCMaintain soft, no stratificationEmissivity of the Aluminum FoilASTM E4080.03Fire Retardant RateBS 476 Part 7Grade 1(Class 1)Size SpecificationsSize1.2*60m, 1.22*76.2m,ect

Lamination Foil
Aluminum Foil Fiberglass Heat Insulation

Aluminum multi-layerHeat Insulation

Working Principle

The heat is an energy, transmits in three ways, conduction, convection and radiation. Through the high temperature to low temperature transfer, and ultimately achieve the dynamic balance of average temperature.

Our roof aluminum foil insulation can work both in cold and hot climites.1.The reflective of the pure aluminum foil is 97% ,that means it can not only stop the radiant heat from the outside and also stop the warmer loss from the inside .2.The middle layer can slow down the heat conduction and convention greatly .
this is why our material can work in both cold and hot climate , it can keep cooler in summer and keep warmer in winter.

Characteristics and Advantages

1. R-valuecanreach7.9,DifferentheatflowdirectionhasdifferentR-Value
2. Doublesidesofpurealuminiumfoil(99.4%),canReflective97%radiant,allowonly
3. uncontinuousaircell,canslowdowntheheattransferandblocktheheatconvection
4. thematerialcannotburn-self,andnotsupportburn,Fire-resistingRate:ClassA
5. itwillnotabsortanywater,Beunaffectedbythehumidityandmoister.
6. becuteasily(knife),befixedconviently(paste,staple),DIYbyyourself
7. Lighterandthinner,willnotbetheburdenoftheconstruction,goodfornewandoldbuilding
8. Donotbecomemildewed,incorruption(purealuminiumfoil)
9. Non-toxic,recycledmaterials,ResuableMaterial
10. cheapandEconomic,healthyandenvironmental
11. keepcooland dryinSummer,KeepwarmanddryinWinter

ApplicationsIndustrial Humidifier & Dehumidifier

metal &Steel Building HomesRoof Underlayments

Cathedral Ceiling Crawl Spaces Hot water Heaters

basement Walls Floors Carpets Garage Doors Pole Barns

1.Heatinsulationandlightinflectinginconstructionandprotectionforbothcoldwaterandhot waterpipe

2.Separationofrefrigerator;warmkeepingforcenterairconditioner,refrigeratorandotherhomeappliances

3.Heatinsulation,soundabsorptionandnoisereductionforcar,train,refrigeratorcarandlaboratory;moistureproofcushionfortraveling

4.Packingforspecialproductsandcoldstorage
5.Canbemadeintodifferentcolorsandantistaticaccordingtocustomers'specificrequirementstoreachthe standardsoftopgradedecoration

Packaging & Shipping
PackedbyPEbagorcustomized package.

Company Profile

Qingdao Taiyue Composite Material Co., Ltd. was established in 2008, which is located in Shandong, China. We are specialized in developing & manufacturing different kinds of thermal insulation materials and swimming pool solar covers.

Our products enjoys a good reputation in China and abroad. We have got ISO/SGS/ROHS certificate.And we have got professional production and technicians and sales teams. Also supported by our advanced production line, we can guarantee our production capacityPetroleum Equipment & Machinery , stable quality and good service.We shall compete the market with competitive price, stable quality and good after sale service.

Welcome to visit our factory if any chances.

FAQ1. Q: Is your company a factory or trading company?
A: Our company is a professional manufactory more than 10 years.
2. Q: Where is your factory located? How can I visit there?
A: Our factory is located in Qingdao City, Shandong Province, China, near to Beijing. All our clients, welcom to visit us if any chance!3. Q: What's your MOQ?
A: For PET metalized film, our MOQ is 1 ton.4. Q: How can I order samples?
A: We can provide FREE samples if you can take care of the freight, so please provide your own expressing account (such as DHL, TNT, UPS etc.) for sample expressing freight collected. The freight cost can be refunded to you if you place an order from us.
5. What is your terms of delivery?A: EXW, FOB, CFR, CIF, DDU.6.What is your terms of payment?
A: T/T 30% as deposit, and 70% balance before delivery or against copy of B/L.
7. Q: What's your best price for PET metalized sheet?
A: We will quote you best price based on your details and quantity, so please advise the details and quantity when you make an inquiry.8. Q: What's your delivery time?
A: The delivery time is about 7-25 days after receiving your deposit payment. The specific delivery time dependson the items and the quantity of your order.9. Do you test all your goods before delivery?A: Yes, we have 100% checking before delivery10: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with Electronics Stocks them,
no matter where they come from.