Business Type:
Manufacturer/Factory,Trading Company
Business Range:
Firefighting Suits, Fire Boots, Fire Helmet, Belt, Fire Gloves, Positive Pressure Air ..
Establishment:
2011
R&D Capacity:
ODM, OEM
Terms of Payment:
LC, T/T
Main Markets:
Southeast Asia, Middle East, Africa
OEM/ODM Service
Sample Available

Fireproof Suit, Fire Protection Suit, Firefighter Suit manufacturer / supplier in China, offering Protective Apparel, Fire Retardant Coverall, Manufacturer for Fire Fighter Aluminum Foil Thermal Insulation Clothing, Fire Fighter Protective Rescue Gum Boots and so on.

1
    YRS
General Supplier
Supplier Homepage Apparel & Accessories Safety & Protective Apparel Fireproof Suit China Fire Protective Clothing Emergency Rescue Suit

China Fire Protective Clothing Emergency Rescue Suit

Get Latest Price
Min. Order / Reference FOB Price
5 Piece US $280.00/ Piece
Local Area: Jiujiang, Jiangxi, China
R&D Capacity: OEM, ODM, Other
Payment Terms: LC, T/T
Usage: Fire
Function: Anti-Radiant Heat, Flame Retardant, Thermal Insulation
Thickness: Medium
1. The clothing should conform to GA633-2006 "Firefighter Emergency Rescue Protective Clothing" standard.
2. Clothing styles and sizes should conform to 17type firefighter emergency and rescue protective clothing of
3. This summer's rescue suit includes jacket, trousers, cap and belt.
Two. Material requirements
1. Material: orange-red double texture fabric with single layer fabric and interwoven aramid and flame retardant viscose fibers dyed in original solution; with anti-static, flame retardant, light weight and strong tensile strength, the outer layer is made of 93% inter-position aramid dyed in original solution, 5% para-position aramid dyed in original solution and 2% anti-static yarn, and the inner layer is dyed by 50% original solution. Inter-color aramid and 50% imported raw liquid Lenzing flame-retardant viscose are blended. The outer surface is moisture-resistant and the inner layer is moisture-absorbent and quick-drying.
2. Technical performance requirements: Technical performance meets the following requirements.
1) Flame retardant property: After 25 times of washing, the longitude and latitude damage lengths are 16 mm and 15 mm respectively, and the duration of combustion is 0 s, and there is no melting and dropping phenomenon.
2) Fracture strength: Longitude and latitude dry fracture strength of fabric are 802 N and 758 N, respectively.
3) Temperature resistance of the outer surface. After five times washing, the water staining grade is 4.
4) Inside surface hygroscopicity and quick drying: after 20 times washing, the water absorption rate is 202%, the dripping diffusion time is 6.8S, the wicking height is 120 mm, the evaporation rate is 0.81 g/h, and the permeability temperature is not less than 9360 g/(m2/d).
5) tear strength: the longitude and latitude tear strength of fabric are 158N and 160N respectively.
6) Thermal stability: After the thermal stability test at (180 +/-5) degree, the change rate of dimension along longitude and latitude direction is 1.0%, and the surface of the sample has no obvious change.
7) Unit area mass: Unit area mass (200 + 10) g/m2.
8) Color fastness: washable stain 4-5 grade , water friction 4-5 grade, artificial light fastness 4-5 grade.
9) Colour difference: Colour difference between front collar and forebody, sleeve and forebody, bag and forebody, left and right forebody and other surface parts is 5 grades.
10) Furring and pilling performance: According to GB/T 4802.2-2008 test, the fuzzing and pilling performance is grade 4.
11) Needle spacing density: every 3 cm (> 12 needles) of light and dark thread and every 3 cm (> 9 needles) of wrapped suture.
12) Joint breaking strength: fabric longitudinal joint breaking strength 690N, fabric longitudinal and latitudinal breaking strength 870N, 830N.
13) Thermal stability of hard accessories: At (180 +/- 5)degrees Celsius, after 5 minutes, the hard accessories retain their original functions.
14) Thermal stability of sewing thread: No melting and scorching of sewing thread was observed after 5 minutes at (180 +/-5)degree.
15) Anti-static performance: the charged quantity of upper and lower garments is 0.4 and 0.6 μgC respectively.
16) Reflective marking band performance: according to GA10-2014 standard requirements of reflective marking band; specific parameters requirements with fire protection clothing.
17) Quality: The total quality of protective clothing is less than 1.5 kg.
3. accessories
1) Zipper: use aramid tape resin imitated teeth flame retardant, high temperature and arc-proof zipper, model 8, the front of rescue jacket zipper and trousers zipper should be no less than 8 zipper; color must match with external materials; zipper use aramid base fabric flame retardant zipper.
2) Magic stickers: Emergency rescue jacket and left arm magic stickers, armband brackets and buckles, smooth appearance, neat hook arrangement, good hook shape, uniform wool surface, uniform thickness, no obvious bump, no obvious stain, uniform color, no obvious color difference, color pattern; in line with GB/T 23315-2009 standards; shear strength 22.4N/ Cm2, peeling strength 4.2N/cm; fatigue resistance: after 1000 clutches, shear strength (> 18.5N/cm2), peeling strength (> 2.4N/cm); smooth appearance, neat hook arrangement, good hook shape, uniform wool surface, uniform thickness, no obvious bump, no obvious stain, uniform color, no obvious color difference, color.
3) Rescue belt: color, material and rescue suit system, double-row pin-button design, metal edge rolling for stomata; smooth surface, no burr and sharp edge, hardware has been anti-corrosion treatment; Belt should also have a certain degree of hardness, comfortable wear, flexible brazing action, fixed and reliable.