China Gasket Plate Heat Exchanger for Water to Water Heat Exchanging Tap Water Heater

Gasket plate heat exchanger for water to water heat exchanging, tap water heater
Applications
General heating and cooling duties. Heating by means of steam, swimming pool heating
Standard design
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids
Between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.
The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.
Typical capacities
Liquid flow rate
Up to 16 kg/s (250 gpm), depending on media, permitted
Pressure drop and temperature program.
Water heating by steam
300 to 800 kW
Working principle
Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.
Food industry: Milk pasteurization, Milk and beverage pasteurization, Wine tempering, Bottled water treatment, CIP (Cleaning-in-Place)heating, Reverse osmosis water.
Marine application: Central cooling of the main or auxiliary engines or turbines, Lubrication oil cooling, Recooling of circulated water for cooling cylinders, pistons, injection nozzles, Cooling of Baoder oil, compressor oil and other lubricants, Preheating of lubrication oil and heavy fuel oil, Preheating of seawater for fresh water production, Heat recovery, Heat exchange to air-condition the passengers' cabins and freight spaces
Others: Turbine oil cooler, Chemical industry, district heating, district cooling, swimming pool heating, solar heating,
Short delivery time.
High quality
Reasonable price
Customer made
Know-how design and customer support

Model BH30BH60B / BH60HBS60HBH100B / BH100HLB100BBH150B / BH150HCross Reference ALFA LAVALM3 M6, M6M TS6MM10M, M10B TL10B M15M, M15B Height, H [mm] 480920940704704108410841885192318851885Width, W [mm] 180320330400410470470480480610650 Min standard length, L [mm] 40050050053054070070085085011501150 Max standard length, L [mm] 6501500150014301440230023002350325020503250Vertical port distance, VC [mm] 3576406403803807197191338133812941294 Horizontal port distance, HC [mm] 60140140203203225225225225298298 Max temperature [°C] 180180180180180180180160160180180 Max pressure [barg] 1610161620.6101610161016 Flange size Pipe 1 1/4"DN50/2" DN50/2" DN65/2"DN65/2"DN100/4"DN100/4"DN100/4"DN100/4"DN150/6"DN150/6" Max. flow rate [kg/s] 41620505080

Model BS200M /BS200BBH200HBH250BH300HCross Reference ALFA LAVALTS20MM20M,T20M,T20BMX25BM30 Height, H [mm]1405215025952920Width, W [mm]7407509201190Min standard length, L [mm]900125015501650Max standard length, L [mm]2700335033505200Vertical port distance, VC [mm]69869819391842Horizontal port distance, HC [mm]363353439596Max temperature180180180180Max pressure [barg]10/1610/1610/1610/16Flange sizeDN200/8"DN200/8"DN200/DN250/8"/10"DN300/DN350/12"/14"Max. flow rate [kg/s]190225250497