China Laser Perforating Machine Laser Perforating Laser Perforating Machine for Sale

Optical splitting system
1. This laser perforatingmachine selects the whole piece stainless steel panel, and after the panel is milled, bored and ground precisely, it can be assembled with finishing welded steel frame, and the precise finishing processing can ensure the installation precision of all the mechanical components. All the pressure instruments, adjusting switch and optical shutter are arrayed in the panel in order to facilitate operation and warning.
2. HANS*GS-D400P laser perforatingmachine equips eight focusing optical heads, which are fixed the respective mechanical skid plateform, and the mechanical skid plateform is assembled in the host panel, while the dimensional mechanical skid plateform can adjust the longitudinal pitch of perforatingand focus precisely, and you can set the value of holes pitch directly on the touch screen.
3. Each optical head is composed of 4 lenses, all the lenses are from American - company.
4. Adopting the totally sealed optical circuits, it can avoid the contamination of external environment to the optical circuits lenses. The piping of dedusting system is assembled in the front of the puncher, in order to avoid the contamination of the box interior and optical circuits.
5. The puncher equips the imported ultra high speed polygon prism of American LINCOLN company, and the highest rotation speed of polygon prism can reach 40000rpm,the gold-plating mirror surface of polygon prism can enhance the reflectivity power of beam. The motor of polygon prism is stepless speed regulating DC motor, you can set the rotation speed directly by the touch screen.
General performance and parameters of HANS*GS-D400P perforatingmachine Laser power400WPLC control typeclosed-loopController Germany SIEMENS servo system Form feeding control Biaxial linkage controlIndicator setting method Independent, simple Spectrophotometric methodby polygon prismPermeability range 100-2000cuPermeability instability Less than 5% (relative error) Maximum perforatingspeed 1920 thousand /minMaximum perforatingdensity4pcs/mmMinimum perforatingdensity1pc/10mmHole diameter range0.05-0.25mmHole shapeoval or round Hole quality neat, without deckle edge or cokingMaximum feeding speed650m/ minperforatingrow number 2-8 rows Acceleration time (0-300m/min) 3sec.Total system power 35KWWidth range of processing tipping paper tray40-80mmMaximum processing winding tray diameter 520mmAfter perforate tipping paper tray, the front-end non-porous paper length and tail length of waste paper(feeding speed is 300m/min)15M(front),2M(tail)Environment requirments 20-30ºC Constant temperatureMachine lifetime10 years Chilling water hardness250mg/LGas consumption of laser head 2.8L/minTemperature of cooling machine, adjusting range 10-30ºCabout the cooling machine temperature and adjusting precision, is there monitor display ?Yes, the adjusting precision is ±0.1ºC. Chilling water flow speed25L/MINWater storage capacity of chiller 0.3M3

Control system
It adopts fully automatic tension control system to ensure the constant paper Machine Hardware tape tension, corresponding to the different specification and different quality tipping paper, we can set the different tension values freely, and ensure the consistent tightness of tipping paper rolls, to avoiOptical Fiber, Cable & Wire d that it appears firstly tight then loose or firstly loose then tight during rolling processing due to non consistent tension.
The tension sensor can test the actual tension of tipping paper and send the information to the tension controller, and the tension controller will compare the tested actual tension with the setting tension, when the actual tension is more than the setting tension, you should reduce the brake torque; when the actual tension is less than the setting tension, you should increase the brake torque. And the starting torque of tipping paper rolls
and the stopping brake torque are controlled by PLC.
The programmable controller PLC is principally responsible to complete various input signals, output control signals and interior calculation. It can control the laser generator, servo system, tension sensor, polygon prism etc.
The touch screen works with PLC to set and show the relative parameters, the faults causes and solutions as well as on-line assistance etc.
I/O interface is the communication main chanel between PLC and all the switches ( like proximity switch, button, electromagnetic valve etc) of the laser perforatingmachine. PLC reOther Safety Products ads all the switch signals and the setting signals of the touch screen through I/O interface, according to the perforatingprocessing requirements, it can have calculation in the interior, and then send the received control signals to I/O interface, in order to control all the relative parts, meanwhile it can send the relative showed signals to the touch screen for display.
Zero meter mechanism (optional accessory)
When the winding motor starts working, the paper feeding speed doesn't reach the setting speed, which phase is the acceleratingphase of paper, in this phase, the laser generator doesn't start working, no need to punch for paper. If without Zero meter mechanism, the non-porous partTag Gun s only can be elimPre-Press Equipment inated manually after rewinding, and the customer needs to increase the equipment and operator.
The working time of Zero meter mechanism can be set freely by the touch screen. The length of eliminating non perforatingparts paper is relative to the working time, generally, the length of eliminating non-porous parts paper is no more than 15 meters.