China New Remote Diagnostics Obdll Vehicle GPS Tracker with J1939 Protocol Engine on off Detect Monitor Voice Tk218-Ez

TK218 OBD-II GPS Tracker is a multifunctional product. It is an integration of OBD-II GPS tracker, car alarm, Remote Diagnostics, support 95% cars and trucks with OBDll connector, plug and play,easy installation.
The device will read vehicle's ECU's data (speed, rpm, odometer, speed, driver behavior data...etc) via CAN-BUS and send out by GPRS network remotely or by blue-tooth connection on spot. It adapts 2.4Ghz RFID technology, which can make it work as a simple keyless alarm system with easy installation. In arm status, the following operations will trigger alarm: engine on, vibration, cut-off power & take-out of the device.
The system will send out alarm message with location by SMS/GPRS to your mobile phone or tracking center immediately.
Features & Functions For TK218 OBDll GPS Car/Truck GPS Tracker:
1. Plug & play design with OBD-II connector, compatible with all the vehicles with OBD-II connector, supports most of vehicles with the CAN-BUS;
2. It is the integration of GPS tracker + car alarm + remotely diagnostics+ J1939 Truck Canbus Protocol;
3. Arm/disarm by SMS/phone call, or by 2.4G RFID tag automatically;
4. Check the real physical address (such as city name, street name.) directly;
5. Track by SMS/website to get the latitude, longitude, speed, direction & odometer etc.;
6. Movement alarm, Over-speed alarm, Geo-fence alarm;
7. Engine on alarm, power failure alarm, vibration alarm;
8. Built-in shock sensor for power saving & triggering vibration alarm;
10. Monitor the voice;
11. Accurate odometer & speed reading directly via CAN-BUS;
12. Data logger 8Mb for offline GPS waypoint;
13. Smart engine ON/OFF status detection;
14. Built-in rechargeable backup battery; when the car battery is cut off or damaged, the built-in backup battery can work for emergency check, and the system will send out power failure alert immediately.
15. Two kinds of location information: GPS coordinates & GSM base station code.
16. Remote diagnostics function. Transmission of the CAN data via blue-tooth or GPRS network:
(1) Vehicle's real-time data: battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times;
(2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times.
17. Read the vehicle's error code & clear the error code via GPRS or blue-tooth;