China Online Tss Total Suspended Solids Sensor Probe

online TSS Total Suspended Solids Sensor/Probe

DG-ZDYG-2087-01 Digital RS485 Suspended Solid Sensor is based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of suspended solids and sludge concentration value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. The product is widely used in sewage plant, water plant, water station, surface water, farming, industry and other fields. Series of online ORP electrode, adopt electrode measuring method, and realizes the automatic temperature compensation in the interior of the electrodes, Automatic identification of standard solution. Electrode adopt imported composite electrode, high precision, good stability,long lifetime, with rapid response, low maintenance cost, real-time online measurement characters etc.. The electrode using standard Modbus RTU (485) communication protocol, 24V DC power supply, four wire mode can very convenient access to sensor networks.
TECHNICAL SPECIFICATIONS

ProductDG-ZDYG-2085-01 online Digital Suspended Solid Sensor

Measuring range

0.01-20000 mg/L,0.01-45000 mg/L ,0.01-120000 mg/L

Inlet pressure

≤0.4Mpa

Current speed

5~60ºC

Communication

RS485 Modbus RTU

Calibration

Sample calibration, slope calibration

Sensor main material

Body: SUS316L + PVC (normal type)

SUS316L + PVC (sea water type)

O-ring: Fluorine rubber

Cable: PVC

Resolution

Less than ± 5% of the measured value (depending on sludge homogeneity)

Relative humidity

<70%RH

The power supply

DC12V

Dimension of the sensor

Protection

IP68/NEMA6P

Cable length

Standard 10m cable, can extended to 100m