China Rubber Shock Absorber

Description

MaterialNR, NBR, SBR, EPDM, FKM, Silicone, HNBR, Viton etc.ApplicationsUsed in faucets, toilets, fitting, pipes, showers and other industry accessories and auto parts.SizeAccording to drawingColorBlack/White/Blue/Red/Yellow, etcTemperatureCommom: -40~230 Celsius DegreesSpecial features
/Working environmentNon-toxic; oil-resistance; heat resistance; abrasion-resistance; aging resistance; insulation; acid and alkaline resistancel airtight; shock absorption, etc.ApplicationUsed in household, fitting, pipes and other industry accessories and auto parts.CertificationSGS, RoHS and FDA.Delivery time20-35days after prepayment received MOQ100-1000pcsPacking detailsAccording to your requestShipmentBy express(DHL/UPS/FEDEX)/By sea/By airPortFOB SHANGHAI OR NINGBO

Different Rubber Material

NBRExcellent resistant to oil,widely used in industrial areaEPDMExcellent resistance to weather and ozone,good resistance to heat,low temperature and chemicalNRHigh elasticity,good chemical strengthCRGenerally good resistance to ozone,aging,and chemical,good mechanical properties over a wide temperature rangeSBRShock resistance,performance well in adhesion and sealingSiliconeWidest operating temperature range,performance stably in high and low temperature,widely use in food sealing areaVT/FKMExcellent resistance to high temperature and a broad range of chemical,permeability and compression set are excellentHNBRThermal stability and oxidation resistanceIIRLow permeability rate and good electrical propertiesFVMQWidest operating temperature range,performance stably in high and low temperature,good resistance to oil and fuelACMGood resistance to mineral to oil,oxygen and ozone

General introduction:
Hangzhou Bright Rubber Plastic Product Co.,Ltd represents high quality and is backed up by our team of quality assurance experts and our ISO 9001 and TS 16949 certifications. Its plant occupies over 2500 square meters of land. Our strengths are our ability to respond quickly and efficiently to customer needs, excellent quality standards, and top notch follow-up service. Our reputation as a reliable and efficient supplier is based on these facts. Our strong engineering team supports our ability to provide excellent quality and on-time delivery.

Office:
Our sale office locates in Hangzhou, China. It is within 2 hours drive to both our factory and airport or sea port in Shanghai and Ningbo. It is also convenient to meet customers from different countries.

Products and materials:
Our company is engaged in manufacture Rubber and plastic parts. The main products include molded rubber parts, Extrusion silicone tube/strip, silicone sponge tube, Injection plastic parts, Extrusion plastic parts, Rubber sponge parts, PVC dipping, The main rubber raw material is EPDM, Natural Rubber, SBR, Nitrile, Silicone, Fluorosilicone, Viton(FKM), Neoprene, Urethane(PU), Polyacrylate( ACM), Ethylene Acrylic(AEM), Santoprene, HNBR, Butyl(IIR), LSR; The main plastic raw material is PP, PA, PE, POM, PC, PVC, PS, PVC, TPE, TPR, TPU.

Profound experience:
Our engineers and QC experts are engaged in rubber plastic industry over 30 years. Our core management team has rich experience and deep understanding of rubber and plastic development.

Industry Standard:
Material standard: ASTM D2000, SAE J200.
Tolerance standard: RMA A1,A2,A3, DIN, ISO302-1,DIN-7715/BS-3734 ,
PPAP document is available for auto parts.

Production capacity:
Factory is working 24 hours by 3 shifts every day, It takes only 3 minutes to finish one mold of products. (If one mold has 50 cavities, then we can produce 50PCS of products within 3 minutes).
Production machines including 350T vacuum pressing machine, 300T pressing machine, 250T machines and more others.

Quality control and test:
It has more than 10 times of quality check for every order, beginning from raw material check to package check. Every production line has at least two QC staff for random check and regular check.
Test: manufactory testing machine includes rubber tension tester, rubber vulcanization instrument, durometer, calipers, ageing oven for Density test, Elongation at break, Bonding strength, Pulling force test, twisting force test, Rergarding other test like anti-high/low temperature which will be tested by Third Party Testing Center as customer required.

Sale service: Every salesman should be in service after strictly trained with productions knowledge and customer-service requirements. Be skilled in exporting business procedure and English communication.


FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer, engineer had rich experience over 20 years.
Q: How to get the quickest quotation?
A: Sending drawing, material, quantity and other requirements by email.
Q: How to get quotation without drawing?
A: Possible send sample, pictures or detail descriptions of products to us, we will return you drawing for /confirm/i.
Q: I have an idea for a new product, but not sure if it can be manufactured. Can you help?
A. Yes! We are always happy to work with potential customers to evaluate the technical feasibility of your idea or design and we can advise on materials, tooling and likely set-up costs.
Q: My custom products have already been developed on CAD. Can you use the drawings?
A. Yes! DWG, DXF, IGES, Solidworks and Rhino files can all be used to generate quotes, models and mould tools - this can save time and money in producing your parts.
Q: Can I test my idea/product before committing to mould tool manufacture?
A. Yes, we can use CAD drawings to make models for design and functional evaluations.
Q: What type of plastic/ rubber material is best for my design/product?
A. Materials selection depends on the application of your design and the environment in which it will function. We will be happy to discuss the alternatives and suggest the best material.
Q: How to get sample?
A: Free sample is available for your quality evaluation, but you should pay the freight. Regarding customize products, sample and mould order will go first before mass production.