Business Type:
Trading Company
Business Range:
Poe Switch, UTP LAN Cable, Network Cable, Wireless Ap, Wireless CPE, Optical Fiber Cable, ..
Establishment:
2014
R&D Capacity:
ODM, OEM, Other
Terms of Payment:
T/T, PayPal, WesternUnion, Small-amountpayment
Main Markets:
North America, South America, Southeast Asia, Middle East
OEM/ODM Service
Sample Available

Network Switch, Poe Switch, Solar Network Switch manufacturer / supplier in China, offering Solar Energy Network Switch with 5 Port Poe 10/100/1000Mbps for Solar Surveillance Solution, 16 Port Network Switch 1000Mbps Support Poe 802.3af/at Supply Power for IP Camera (TS1600G), 2 Port Poe Media Converter 10/100Mbps and so on.

1
    YRS
General Supplier

China SFP Module 60km GBIC Optical Transceiver

Get Latest Price
Min. Order / Reference FOB Price
10 Pieces US $40.50/ Pieces
Local Area: Guangzhou, Guangdong, China
R&D Capacity: OEM, ODM, Other
Payment Terms: T/T, PayPal, WesternUnion, Small-amountpayment
Type: Fiber Transceiver
Wiring Devices: Fiber Switch,Router,Network Cark,SDH,Server
Certification: CE, ISO, RoHS
SFP module 60km GBIC Optical Transceiver (PHY-8564-1LS)
Features
l Up to 1.25 Gbps bi-directional data links
l Hot-pluggable SFP footprint
l 850nm Oxide VCSEL laser transmitter
l Duplex LC connector
l RoHS Compliant and Lead-Free
l Up to 500m on 50/125μm MMF,300m on 62.5/125μm MMF
l metal enclosure, for lower EMI
l Single power supply 3.3V
l Low power dissipation
l Commercial operating temperature range: 0°C to 70°C

APPLICATIONS

l 1.25 Gbps 1000base-SX Ethernet
l Dual Rate 1.063 Gbps Fibre Channel

The PHY-8524-1LS Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC- PI-2 Rev. 7.0. They are RoHS compliant and lead-free per Directive 2002/95/EC
I. Pin Descriptions

Pin Symbol Name/Description Ref. 1 VEET Transmitter Ground (Common with Receiver Ground) 1 2 TFAULT Transmitter Fault. Not supported. 3 TDIS Transmitter Disable. Laser output disabled on high or open. 2 4 MOD_DEF(2) Module Definition 2. Data line for Serial ID. 3 5 MOD_DEF(1) Module Definition 1. Clock line for Serial ID. 3 6 MOD_DEF(0) Module Definition 0. Grounded within the module. 3 7 Rate Select No connection required 8 LOS Loss of Signal indication. Logic 0 indicates normal operation. 4 9 VEER Receiver Ground (Common with Transmitter Ground) 1 10 VEER Receiver Ground (Common with Transmitter Ground) 1 11 VEER Receiver Ground (Common with Transmitter Ground) 1 12 RD-Receiver Inverted DATA out. AC Coupled 13 RD+ Receiver Non-inverted DATA out. AC Coupled 14 VEER Receiver Ground (Common with Transmitter Ground) 1 15 VCCR Receiver Power Supply 16 VCCT Transmitter Power Supply 17 VEET Transmitter Ground (Common with Receiver Ground) 1 18 TD+ Transmitter Non-Inverted DATA in. AC Coupled. 19 TD-Transmitter Inverted DATA in. AC Coupled. 20 VEET Transmitter Ground (Common with Receiver Ground) 1

Notes:
1. Circuit ground is internally isolated from chassis ground.
2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3. Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V.
MOD_DEF(0) pulls line low to indicate module is plugged in.
4. LOS is open collector output. Should be pulled up with 4.7k - 10kohms on host board to a voltage
between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

II. Absolute Maximum Ratings

ParameterSymbolMinTypMaxUnitRef.Maximum Supply VoltageVcc-0.5 4.0V Storage TemperatureTS-40 85°C Case Operating TemperatureTA0 70°C Relative HumidityRH0 85%1

Notes:
1. Non condensing.


III. Electrical Characteristics (TA = 0 to 70 °C, VCC = 3.0 to 3.6 Volts)

ParameterSymbolMinTypMaxUnitRef.Supply VoltageVcc3.0 3.6V Supply CurrentIcc 150240mA TransmitterInput differential impedanceRin 100 Ω2Single ended data input swingVin,pp250 1200mV3Transmit Disable VoltageVD2 VccV4Transmit Enable VoltageVENVee Vee+ 0.8V ReceiverSingle ended data output swingVout,pp250450550mV5Data output rise timetr 175ps6Data output fall timetf 175ps6Mask Margin 45%LOS FaultVLOS fault2 VccHOSTV7LOS NormalVLOS normVee Vee+0.5V7Power Supply RejectionPSR100 mVpp8Deterministic Jitter ContributionRX Δ DJ 51.7ps9Total Jitter ContributionRX Δ TJ <65122.4ps10


Notes:
2. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
3. We recommend <600mV for best EMI performance.
4. Or open circuit.
5. Into 100 ohms differential termination.
6. 20 - 80 %
7. LOS is an open collector output. Should be pulled up with 4.7k - 10k ohms on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.
8. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value applied through the recommended power supply filtering network.
9. Typical peak-to-peak jitter (=6*RMS width of Jitter).
10. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and Δ DJ.
IV. Optical Characteristics (TOP = 0 to 70 °C, VCC = 3. 00 to 3.60 Volts)

ParameterSymbol Min Typ Max Unit RefTransmitterOutput Opt. Pwr: 50 or 62.5 MMF POUT-9 -3dBm1Optical Wavelength λ 830 860 nm Spectral Width σ0.85 nm Optical Modulation Amplitude @ 1.0625 Gbps OMA156 μW2Optical Rise/Fall Time tr/ tf 100 150 ps 3Relative Intensity Noise RIN-120 dB/Hz Deterministic Jitter Contribution TX Δ DJ 2056.5ps4Total Jitter Contribution TX Δ TJ <65 119 ps 5Extinction Ratio @ 1.25 GbpsER 9dB Mask Margin45%ReceiverReceiver Sensitivity = 1.0625 Gbps RxSENS -20dBm6Receiver Sensitivity = 1.25 Gbps RxSENS -20dBm7Stressed RX sens. =1.0625 Gbps 0.055 mW8Stressed RX sens. =1.25 Gbps -13.5 dBm 9Average Receiver Power RxMAX0 dBm Receiver Elec. 3 dB cutoff freq. 1500MHz Optical Center Wavelength λC 770 860 nm Optical Return Loss 12dB LOS De-Assert LOSD-20 dBm LOS Assert LOSA -30dBm LOS Hysteresis 0.5dB


Notes:
1. Class 1 Laser Safety per FDA/CDRH, IEC, and EN60825-1 laser safety standards.
2. Equivalent extinction ratio specification for Fibre Channel. Allows smaller ER at higher average power.
3. Unfiltered, 20-80%. Complies with FC 1x and 2x eye mask when filtered.
4. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and Δ DJ.
5. If measured with TJ-free data input signal. In actual application, output TJ will be given by:
6. Specifications are for 50 micro-meter or 62.5 micro-meter fiber
7. As measured with 9dB extinction ratio.
8. Measured with conformance signals defined in FC-PI-2 Rev. 7.0 specifications.
9. Measured with conformance signals defined in IEEE 802.3 specifications.

V. General Specifications

ParameterSymbolMinTypMaxUnitsRef.Data RateBR 1.062 Gbps1 1.25Bit Error RateBER 10-12 Fiber Length on 50/125μm MMFL 550
300m2
Fiber Length on 62.5/125μm MMFL 300
150m2


Notes:
1. Gigabit Ethernet and 1x, Fibre Channel compatible, per IEEE 802.3 and FC-PI-2 Rev. 7.0
respectively.
2. At 1.0625 Gb/s Fibre Channel and 1.25 Gb/s Gigabit Ethernet data rates.

VI. Environmental Specifications

PHY-8524-1LS 850nm SFP transceivers have a commercial operating temperature range from 0°C to +70°C case temperature.

ParameterSymbolMinTypMaxUnitsRef. Case Operating TemperatureTop0 70°C Storage TemperatureTsto-40 85°C


FAQ
1.What is the warranty on the parts you sell?
All parts sold by YINET meet all of the manufactures specifications and carry one year warranty. Some customized products could carry up to three years warranty.
2.How to repair a broken product?such as POE switch,wireless router and Ethernet switch products
Usually we supply free substitute model for the small value products. and we bear the freight. For Big-ticket items or high value products,Considering the high freight and cost we can supply free parts such as PCBA,power adapter or power supply etc. We can also provide remote guidance.
3.What payment methods do you offer?
We accept payment via T/T, L/C,Western Union, MoneyGram and PayPal;
4. What is your minimum order?
To achieve customers' satisfaction, we accept sample order, even one Piece.