China Shot Blasting Shot Blast Shot Blasting Chamber

Composite Panel Suction Recycling Type Shot Blasting Chamber
Shot blasting chamber is mainly used for surface cleaning and strengthening of steel, castings, aluminum alloy parts and other parts. Through saElectronics Stocks ndblasting can remove the complex workpiece surface contamination, the oxide skin, welding slag, the waste paint and so on, causes the workpiece surface to be bright and cleOther Safety Products an, simultaneously reduce the work piece internal stress, enables the workpiece surface to obtain the strengthening, thus achieves enhances the workpiece surface and the intrinsic quality goal.1. Suction recycling type shot blastingchamber main compositions1Sandblastingchamber2Abrasivestoragehopper3Sandblastingunit4Honeycombfloor5Separator6Lightingsystem7Dustremovalsystem8Trolleysystem9Electriccontrolsystem
2. Structural characteristice of Shot Blasting Chamber
This machine is a special reciprocating sand blasting machine, which consists of Sand blasting chamber, Sand blasting tank, Abrasive recycling system, Trolley system, Lighting system, Dust removal system, Electric control system, etc.Blastingchamber
Blastingchambershellismadeofsectionsteel,rockwoolcompositepanels,anditisastrong,sealandspaciousoperationspacetocleantheworkpiece.Blastingchamberisconsistofbodyshell,leftandrightsidewall,lateralwall,roofguardboard,etc.The sandblastingchamberadopts wearresistantrubber,andrubberplatespinnedbydepressionbarpressure.Thiscanprolongtheservicelife,reducenoise.Shot blasting system
We fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.Honeycombfloor
Sand room module combination detachable honeycomb floor is one the basis of old honeycomb floor, through many times optimization and improvement, fully considering the wear and maintenance of honeycomb floor and recover pipe during the long-term use, making the floor and pipe into detachable module combination. The maintenance of the equipment is easy and fast, avoid more accessories changing and reduce the cost of equipment maintenance in the course of long time operation. This structure is initiated firstly by our company and successfully applied to many customers' environmental sand blasting room project. The pit of this kind structure sand blasting room only need less than 0.5 m.Separator
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasiWelding & Soldering Supplies ve controlling valve.Dust removal system
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national staPaper Machinery ndard.Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.Our service:1Replyyourinquiryin8workinghours.2Experiencedstaffsanswerallyourquestionsintime.3Customizeddesignisavailable.4Exclusiveanduniquesolutioncanbeprovidedbyourprofessionalengineersandstaff.5Specialdiscountandprotectionofsalesareprovidedtoourdistributor.6WeareprofessionalmanufacturerofshotblastingMachine.Haveaprofessionaldesign
teamwithmorethan20years experienceengineers,competitivewithgoodquality.7Asanhonestseller,wealwaysusesuperiorrawmaterial,advancedmachines,skilled
technicianstoensureourproductstobefinishedinhighqualityandstablefeature.8promptdelivery,siteinstallationandcommissioning.
Notice:
According to your requirements, the most suitable machine will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. What's your production capacity per day (8 hours)?
based on this detailed information, the detailed technical proposals will be sent to you for reference.FAQ:
After-sale service:
1. InVariable-Frequency Drive stallation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience : Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
5. Our shot blasting spare parts are high quality withCr20SHigh Chrome, ZGMn13, Mn65, etc.Trade Information:
MOQ: 1set.
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB (FCA), CIP, CFR, CIF, DDU, DDP, Turnkey.
Payment term: 30% deposit by T/T, the balance paid before delivery or L/C at sight.
Delivery time: Within 20-60 days according to different type equipment.Any question please kindly contact with us and welcome to visit our factory!