Xinlu Wire Mesh Products Co., ltd is made by winding cold-rolled wire, approximately triangular in cross section, around a circular array of the longitudinal rods. The wire is attached to the rods by welding, producing rigid one-piecWelding & Soldering Supplies e units having high strength characteristics at minimum weights.Slot opening for continuous-slot screens are manufactured by spacing successive turns of the outer wire to produce the dMeter for Electricity esired slot size. All slots should be clean and free of burrs and cuttings.Each slot opening between adjacent wires is V-shaped, from the special shape of wire used to form the Johnson screens surface. The V-shaped openings designed to be nonclogging, areElectric Motor narrowest at the outer face and widen inwardly.
Wire Width | Wire Height | Relief Angle | Typical Support Rods | Lean Pipe & Pipe Rack System 30V.030".06"10.125" round45V.045".09"10.125" round6Cable Tools 3V.063".11"13.156" round69U.069".17"8.075" x 1" bar93V.093".15"13.25" round or .075" bar93U.093".17"5.25" or .38" round125V.125".20"13.38" round