China Wooden Waterproof Spc Plastic Vinyl Flooring

Product Description

Plank Size: 152.4*914.4 mm Tile Size: 304.8*609.6mm

184.9*1219.2mm

228.6*1219.2mm

190*1240mm

152.4*1219.2mm

Large Plank Size: 1238*225mm XL Size: 1810*234mm

1238*178mm

1238*146mm

All the floor surfaces can be produced into any sizes that listed above.

Warranties: Lifetime Residential Wear

Lifetime waterproof

Lifetime Structure

10 Years Commercial Wear

Installation Areas: Below,on,or Above GradeCompliance: CARB Compliant

Every step of process is under controlled seriously to make sure final products quality .

Packaging & Shipping

In-Floor Radiant Heat:

PVC flooring can be installed over radiant heat using the floating or glue down method.

When gluing floor,use only FNLS recommended multipurpose adhesive over manufactuer's

Recommended substrate.

Turn the heat off for 24 hours before, during and 24 hours after installation when installing over

Radiant heated subfloors.

Failure to turn the heat off may result in significantly shortened working time of the adhesive

Floor temperature must not exceed 30°C

once the installation has been completed ,the heating system should be turned on

and increased gradually(5 degree increments) until returning to normal operating

conditions.

Failure to strictly follow adhesive manufacturer's guidelines may result in failure

And void the warranty.

Warning: Electric heating mats that are not embedded into the subfloor are not recommended for use underneath FNLS.Using electric heating mats that are not embedded and applied directly underneath FNLS could void the warranty for your floor

In case of failure. It is best to install FNLS over embedded radiant floor

Heating systems and adhere to the guidelines listed above.

Company Information