Conventional Precision Gear Hobbing Machine Y3150 for Cutting Helical Gears & Worm Wheel

The model Y3150E General-purpose Gear Hobbing Machine is capable of cutting spur and helical gears, worm wheelsand short spline shafts in one-off, small-scale and a large-scale production. The machine features reasonable construction,high rigidity, less thermal deformation, running in high speed and being able to work under heavy cutting load, consistentaccuracy, easy operation, and simple setup. It can work in the conventional or climb method. It is equipped with an automatic
shut-down device, safety-securing mechanisms and an automatic lubricating system. The machine can be furnished withimported hydraulic components or tangential hob head for cutting worm wheel on customer's request.DescriptionUnit Y3150EMax. workpiece dia.mm500Max. modulemm8Min. tooth number6Max. worktable speedr/min7.8Hole dia. of the worktablemm80T-slot number of the worktable
piece6Screw for T-slot of the worktable
piece6-M12´LTool speed / stepsr/min40 ~ 250/9Distance between hob axis and worktable surfacemm235 ~ 535Min. center distance between hob and worktablemm30Distance between tailstock end face and worktable surfacemm380 ~ 630Max. hob dia. and lengthmm160´160Max. hob head swiveling angledegree240Total powerkW6.45Overall dimensions L´W´Hcm244´136´180Case dimensions L´W´Hcm269´187´233Net/Gross weightkg4500/5500
FAQ
1. How can I choose the most suitable machines?
A: You can choose the exact model by yourself. Or you can tell us your specifications, to let us choose the best model for you, too.
You can also send us the product drawing, and we will choose the most suitable machines for you.
.
2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are brand new, made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.
3. Is machine tested ?
A: The accuracy, noisy will be tested according to China GB standard.4.Whatisyourtradeterms?
A:FOB, CFR and CIF all acceptable.5. What's the Payment Terms?
A :T/T 30% down payment when order ,70% balance payment before shipment;
Irrevocable L/Cat sight also acceptable but it will subject additional bank fee.
6. Do you accept cash orL/C?
A: We acceptT/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account. 7. What's the MOQ?
A: 1 set (only some low cost machines will be more than 1 set)8. How is the warranty?
A: 12 months after shipment date9. If I have a problem setting up/ getting it running problem,will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.