GSM900MHz DCS1800MHz WCDMA1900MHz 3G Triple Frequency Mobile Signal AmplifierGSM 3G Triband Signal Booster TE-91821BPlease Contact with us at:
Mr.Jerry
Phone/+86-13603042894
Brief Description:
GSM 3G Triband Booster Signal Booster TE91821B is intended to strengthen the signal of 900MHz/1800MHz/2100MHz mobile phone in the buildings. Ideal for use in areas where the 900MHz/1800MHz/2100MHz signal is weak to cause Call dropout or Cant connection.The device improves the voice calls and data VOICE GPRS and EDGE (depends of the signal operator).Features:
*Provide quick coverage solution for small signal weak &block zones.reduce drop/off calls.
*Compact size, low consumption, easy installation, great cover.
*Cover about 200-300square meterswithout block or obstruct.
* Reduce cellphone transimt power and radiation, extend cellphone battery life.
*High linear design, low interference to BTS.
*Manual Gain Control function.
*Triband in one repeater, effectively reduce the project cost.Applicable place:
It can be applied in Building rooms there have weak signal of mobile.Specification:
Frequency Range:
1.GSM900MHz:(Uplink:890-915MHz;Downlink:935-960MHz);
2.DCS1800MHz:(Uplink:1710-1785MHz;Downlink:1805-1880MHz);
3.WCDMA1900MHz:(Uplink:1920-1980MHz;Downlink:2110-2170MHz);
Max Gain: (Uplink)Gp:50-60dB;(Downlink)Gp:55-65dB;
BandWidth:Wide Band;
Ripple in Band:CDMA/GSM<=5dB;DCS<=10dB;WCDMA<=5dB;
Max. Input Power Without Damage:0dBm;
Output Power:23dBm;Intermodulation Products:
9KHz~1GHz:(Uplink)<=-36dBm;(Downlink)<=-36dBm@Po<=20dBm;1GHz~12.75GHz:(Uplink)<=-30dBm;(Downlink)<=-30dBm@Po<=20dBm;
Spurious Emission:
9KHz~1GHz:(Uplink)<= -36dBm;(Downlink)<=-36 dBm;
1GHz~12.75GHz:(Uplink)<= -30dBm;(Downlink)<= -30 dBm;
Spurious Emission Mask(WCDMA):Complies with 3GPP TS 25.106;
Modulation Accuracy(WCDMA):Complies with 3GPP TS 25.106;
Peak Code Domain Error(WCDMA):Complies with 3GPP TS 25.106;
ACRR( WCDMA ):≥ 30dB @±5MHz&±10MHz;
Noise Figure @max. gain:<= 8dB(Typical);
Return loss:<= -8 dB;
Time Delay:<=0.5 μs;
MTBF:>50000 hours;
Power Supply:AC:90~265V, 50/ 60Hz;DC:5V/5A;
Power Consumption:< 30W;
Impedance:50 ohm
Mechanical Specification:
RF Connector:N-Female
Cooling:Heatsink Convection cooling
Dimensions (D xW xH ):330*268*58(mm)
Weight:< 2.5Kg
Installation Type:Wall Installation
Environment Conditions:IP40
Humidity:< 90%
Operating Temperature:-10ºC~55ºC
Package contents:
1pcsAC90-264V,DC5/5A power supply adapter
1pcsAC power cord(EU standard/US standard/UK standard/ SA standard/China standardetc);
1pcsInstallation kit
1pcsUser manual