Ksd Bimetal Thermostat Oil Heater Thermal

Application: Temperature control of the electric apparatuses like water heater, frier, cylinder washing machine, electrical boiler, sealing machine, electrical oven, cake toaster, subterrene, steak stove, and commercial freezer etc.Product characteristicsThe products of our company have the following characteristics compared with those of the multinationals:
1. Non-contact sintering and long service life. There is absolutely no contact sintering in our products, and the failure rate of those of the multinationals is about 3‰;
2. No temperature drift and accurate temperature control. The temperature drift of our products is 1/2~1/4 of those of the multinationals;
3. Little on and off difference and constant temperature of the controlled liquid. The on and off difference is 1/2~1/3 of those of the multinationals;
4. Exquisite appearance: top-grade stainless steel spot welding and welding processing in China;
5. Quality promise: the failure rate of our products is≤3‰, and we will make three times' compensation of the exceeding part;
6. Testing equipment: automatically controlled by computer;
7, :CE,VDE,ROHS;
7. Certificates: CE,VDE,ROHS;
8. Management system: implementing according to ISO9001We produce thermostat for heater thermostat , fry pot thermostat , electrical iron thermostat Oil heater thermostat , oil sly thermostat , oven heater thermostat . etc.
10A- 16A, good quality . best price , Please feel free connect with us . All products with CE and TUV certificateAdvantages:
Easy mounting.
Rapid heat transmission.
High durability.
No breakdown, no flashover.
Every product will be tested, extremely high temperature pass rate.
High precision
Parameters:
Use
Temperature control/Overheat protection
Appliance
Coffee maker/ Drinking machine/toaster/Microwave oven/ Heating/ Portable Refrigerator/etc
Reset type
Automatic
base material
resist heat resin base
Amperage
5A/10A/16A
Max. Operating Temperature
180°C
Differential
Refer to the regulation
Tolerance
Refer to the regulation
Protection class
IP00
Contact material
Silver/Gold
Dielectric Strength
Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.
Insulation
Resistance
With a DC 500V megger, borne DC 500V, the tested value is over 10MW.
Resistance
Between Terminals
Below 50mW
Temp. characteristics:
Normal type: OFF temperature higher than ON temperature.(Normal close)
K type: ON temperature higher than OFF temperature.(Normal open)
One-shot type: The thermostat switches on at room temperature and it won't be able to reset after switching off.
Maximum ambient temperature
205°C(Long period)
235°C(Less than 15 min)
Diameter of
bimetal disc
F12.8mm(1/2″)
Approvals
UL/CQC/TUV
Terminal type
Customized (Refer to our specification)
Cover/Bracket
Customized (Refer to our specification)
Dimension of the main body:
Safety certificate:
Max. OT
Life
120V 7A
240V 5A
250V 5A
250V 10A
125V 16A
250V 16A
145°C
60,000
CQC,TUV
CQC,TUV
100,000
UL, sec. 2
180°C
100,000
CQC,TÜV,UL, sec. 2
UL, sec. 2
Installation and Direction for Use:
Method of earth: By means of the metal cup of thermostat connected in the earthing metal part.
The thermostat should work in environment with humidity not higher than 90%, free of caustic, flammable gas and conducting dust.
When the thermostat is used to sense the temperature of solid items, its cover should be clung to the heating part of such items. Meanwhile, heat-conducting silicon grease, or other heat media of similar nature, should be applied to the cover's surface.
If the thermostat is used to sense the temperature of liquids or steam, it is strongly recommended to adopt a version with stainless-steeled cup. Moreover, cautious measures should be taken to prevent liquids getting into/onto the thermostat's insulation parts.
The top of the cup must not be pressed to sink, so as to avoid adverse effect on the thermostat's temperature sensitivity or its other functions.
Liquids must be kept out of the thermostat's inner part! The base must avid any force that could lead to crack; it should be kept clear and away from the pollution of electric substance to prevent insulation weakening that leads to short-circuited damages.
The terminals should be bent, or else, the reliability of electric connection will be influenced.