LED Lamp, Home Appliance, Cosmetic Plastic Hot Runner Hot Mold Half

Hot half mode advantage
A. High processing accuracy
The overall processing accuracy of hot runner system and mold has been
improved, which increases the stability of hot runner.
B. Short production cycle of mold
Hot runner mold and hot runner system are processed in ZYTL workshop, so as
to save processing time for customers.
C. Easy assembly
Hot runner mold can be transported to customer
in whole and can be assembled with the mold
core plate quickly.
D. Easy maintenance
When maintaining mold plate A or mold core
plate, you need not to disassemble the hot runner
but remove the mold, which improves the
maintenance efficiency and shorten the
maintenance time.
E. Effective protection
When the hot runner system is free from
adhesive leakage and the parts work normally,
you need not to disassemble or assemble all parts
of the hot runner frequently, which can
effectively protect the hot runner system and
improve the service life.

Advantage of using hot runner

A.Simplified mold design, unlike the three plate mold has 2 to 3 parting surface, the material head is not easy to take and install automatic operation difficulties, the middle plate makes the guiding system wear quickly, the drive drive trouble, open and close mold time than the single parting surface long, the material head proportion (such as bottle cap mold).

B.Limited melt temperature drop, long enough flow into the cavity, good for the crystallized material with narrow temperature range, F7 die injection, no need to raise the injection temperature to compensate.

C.Precise temperature regulation for each gate.

D.Small pressure loss, make the high pressure melt into the cavity, reduce the injection pressure, clamping force, holding pressure longer, more effective.

E.More freedom to optimize the choice of gate, more uniform filling flow, less temperature and pressure loss and shrinkage difference, internal stress.

F.Glue can be added sequentially to adjust the bonding line and maintain pressure.

G.Make the lamination possible.

H.Save labor (cutting head, secondary processing, grinding, pumping).

I.Save time (period).

J.Save electricity, save material (available small machine, no crushing cycle, may CPI, PPI, 845 large power plant losses, electricity prices rose.Material price increases, recycled material is not easy to use, easy to change the characteristics)