New Fire Fighter Protective Clothing, Fire Protective Auit

Part 1:Product introduction
The style, color, logo and size of this product should meet the requirements of the logo system of the style and logo of type 17 fire fighting protective clothing for firefighters.
Firefighters'fire fighting protective clothing is mainly worn by firefighters during fire fighting and rescue. It is a special clothing used to protect the trunk, head and neck, arms and legs. This product can not be used in high temperature environment (such as forest fires, wilderness fires and forest fires).
The protective clothing has three layers of structure, namely, the outer layer (Bonvepta twin silk dens), the waterproof breathable layer (insulation layer) (aramid non-woven fabric + flame retardant PTFE film) and the comfortable layer (Bonvepta Thermal Poka). Protective clothing has the advantages of flame retardant, lightweight, strong tensile strength, anti-static and striking logo, which can protect firefighters from long-term fire fighting. Weight of the whole suit (L code): 3.334 kgPart 2:Materials and structures
(I) main structure:
1. Upper and lower body structure, the overlapping part between jacket and trousers is more than 200mm.
2. Collar: the collar is vertical collar design, the front collar is provided with a guard collar, and the inside of the collar is made of pastel and skin-tight comfortable fabric.
3. Reflective marking belt: there is a 360-degree circular reflective marking belt for each coat on the chest, hem and cuff, and a 360-degree circular reflective marking belt for each pair of trousers on the small legs. The reflective tape is 50.8mm (2 inches) wide and has a yellowish-silver color.
4. Pants crotch: pants crotch adopts integrated design.
5. Trousers back strap: it is equipped with H type back strap, which can be adjusted as required and disassembled.
6. The front lapel of the coat is no. 8.
(2) subsidiary structure
1. Pockets: radio stereo pockets are set outside the left breast of the coat, and inner pockets are arranged inside, and outer pockets are set at the bottom. Outside thigh each set tool bag 1. All outer pockets are provided with leakage holes.
2. Left arm magic patch: 90mm * 110mm shield type magic patch is set on the outside of the upper left arm, which can be pasted with shield type logo.
3, cuff: cuff place USES the horseshoe cuff design, outer material package edge, set to tighten regulation loops, and configure the rib protection wristbands, protective wristbands on the thumb hole rib, set inside the water stop cloth.
4. Front of the coat: the front of the jacket is a through - through design.
5. Upper hem: the lower hem of the upper comfortable layer is provided with waterproof cloth.
6. Bottom of trousers: the bottom of trousers adopts circular arc design, waterproof cloth is set inside, zipper is set inside and wear-resistant material is set at the bottom.
7. Reinforcing treatment: the shoulder, elbow and knee are thickened with wear-resistant layer, which is soft and easy to clean.
8. There are two hanging loops on the left and right shoulder.
(3) Technical performance:
TPP (cal/cm2): 31.8
Outer Layer: Flame Retardant Performance: Flame Release Time (s): 0, Damage Length (mm): Longitudinal 23, Latitudinal 23, no melting, dropping phenomenon.
Waterproof breathable layer (heat insulation layer): flame retardant performance: duration: longitude and latitude: 0 s; damage length mm: longitude 46, latitude 46, no melting and dropping phenomenon;
Comfort Layer: Flame Retardant Performance: Longitudinal and Latitudinal: 0s; Damage Length mm: Longitudinal 28, Latitudinal 34, no melting and dropping phenomenon;
Reflective marker band: flame retardant performance: duration: longitude and latitude: 0s; damage length mm: longitude 26, latitude 16, no melting and dropping phenomenon;
External reinforcement materials: flame retardant performance: duration: longitude and latitude: 0s; damage length mm: longitude 3, latitude 4, no melting and dropping phenomenon;
Flame retardant performance of life-saving tractor belt: duration: longitude and latitude: 0s; damage length mm: longitude 5, latitude 3, no melting and dropping phenomenon;
Surface moisture resistance: outer layer 3;
Fracture strength: longitude of outer layer: 1892N; latitude: 1591N; longitude of comfortable layer: 718.5N; latitude: 707.9N;
Fracture strength of lifesaving traction zone: 8948N
Tearing strength (N): longitude 465.0, latitude 334.2;
Fracture Strength of Joints (N): Longitudinal 1357N and Latitudinal 1110N
Unit Area Quality (g/): Outer Layer: 222; Waterproof Permeable Layer: 128; Comfortable Layer: 136; Waterproof Permeable Layer: Hydrostatic Pressure: > 50KPa; Oil Resistance (> 3 grades); Water Permeability: 5994g/m2 24h; Oil Resistance (> 3); Needle Distance Density: Light and Dark Line (Needle/3cm) > 12; Appearance: All parts of ironing, neatness, neatness, and cleanliness. No hot yellow, water stain, bright, powder printing, thread head; collar uniform, no warping; basically the same symmetrical parts; no degumming and surface glue; correct label position, accurate and clear size sign.