Powder Coating Line for Aluminum Radiator with Good Quality

Introductions:
Choose the most suitable powder coating line according to your actual condition.
The followings are 5 common powder coating line, you can also contact me to help you to design the most suitable plan.Mode 1: Manual powder coating:
Pretreatment, manual spraying, manual transfer to high temperature curing oven,then powder coating finish.
Advantages:
Low cost; Easy to operate; less occupied area.
Disadvantages: High demand for labor and Production capacity is slightly lower
Mode 2: Full automatic powder coating line:
Loading-spraying pretreatment (not including pickling)-drying in low temperature drying tunnel-automatic spraying-manual repair painting- high temperature oven curing-cooling the workpiece-unloading-powder coating finish.
Advantages: When spraying large quantities of the same workpiece, it will reduce the labor costs and energy consumption.
Disadvantages: Not suitable for small batch production.Requires high technical operation, complex maintenance and high maintenance costs, large area occupied.
Mode 3: semi-automatic powder coating line:
Pretreatment (not in the coating line)-loading-manual spraying- high temperature oven curing-cooling-unloading - coating finish.
Introduction: The workpiece walking automatically with the spray chain, when passing through the coating booth with two spraying stations, 2 workers each holding a spray gun complete the spraying work; the workpieces after coating come out from coating booth, entering the constant temperature curing oven, then complete curing work.Advantages: Much less investment and maintenance cost and difficulty than full automatic powder coating line. Almost the same daily output capacity with full automatic line.
Disadvantages: , small batch will still cause high energy consumption and spraying cost.Mode 4: the small circulation spraying chain and curing oven with 2 sides openning:
Building a small cycles spraying chain with 2 working station manual coating booth, workpiece hanging on the chain running automatically, passing through the coating booth in a constant speed, 2 workers each holding a manual spray gun spraying on the workpieces; then manually transferred the coated workpieces to curing oven; This spraying method, the spray ability accessible to" semi-automatic powder coating line ", but lower investment and smaller occupied area.Advantages: high spraying efficiency, spraying quality is easier to control than mode 1; Daily output get close to mode 3, semi-automatic coating line if workers are matched well.
Disadvantages: , small batch will still cause high energy consumption and spraying cost.If you interested in our products, please feel free to contact me. We can customized all kinds of equipments about powder coating and provide you a solution according to your actual conditions.We arefactory with rich foreign trade experienceWe have professional technical teamOur products have good quality and long working lifeWe have good after-sale serviceWe assure you of our best services at all times.
Welcome to our factory, we have spray shop and warehouse that you can see the results of field spraying of products or do it by yourself.