Rubber Covered Double Lip W/Garter Tc Type Shaft Oil Seal

Rubber Covered Double Lip W/Garter TC Type Shaft Oil SealThe TC profile is a shaft seal composed of a single metal cage with a rubber coating, a primary sealing lip with integrated spring and an additional anti-pollution sealing lip.Oil sealDrawingPrimary usesFeatureT TypeOil seal for dusty environments
Max pressure: 0.03MpaOil seal for very fine dust duty on one side, and fluid sealed on the other sideS TypeOil sea for dust-free applications
ssure: 0.03MpaOil seal for dust-free us with fluid sealed on one sideAdvantages

Very good static sealing
Very good thermal expansion compensation
Greater roughness is allowed in the housing
Reduced risk of corrosion
Sealing for low and high viscosity fluids
Modern primary sealing lip with low radial forces
Protection against undesirable air contaminants

ApplicationsShaft sealing
Motors
Pumps
TransmissionsNBR (Nitrile Butadiene Rubber)
Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene copolymer. While the acrylonitrile content is important, the resistance to oil and fuel is more so. Conversely, the elasticity and compression set are not as good. The NBR has good mechanical properties and good wear resistance. However, its resistance to atmospheric agents and the ozone is relatively low.Material & Working Temp.NBR (-40~+100)HNBR (-25 ~+140)FKM (-20 ~ +200)Chemical resistanceAliphatic hydrocarbons (propane, butane, petroleum, diesel fuel)
Mineral oils and greases
Fire-resistant fluids (HFA, HFB and HFC)
Diluted acids, low-temperature alkaline and saline solutions
Water (up to +100°C max)Temperature range-30°C / +100°C (short-term peak at +120°C)
-40°C / +100°C with particular NBRs
FKM (fluorinated rubber)
Depending on their structure and fluorine content, the chemical resistance and resistance to the cold in fluororubbers can vary. This FKM-based rubber is very often used for high-temperature hydraulics and pneumatics, for industrial valves, injection/fuel systems, motor seals and high-vacuum systems.Material & Working Temp.NBR (-40~+100)HNBR (-25 ~+140)FKM (-20 ~ +200)Chemical resistanceMineral oils and greases, ASTM n°1, IRM 902 and IRM 903 oils.
Fire-resistant liquids (HFD)
Silicone oils and greases
Mineral and vegetable oils and greases
Aliphatic hydrocarbons (propane, butane, petroleum)
Aromatic hydrocarbons (benzene, toluene)
Chlorinated hydrocarbons (trichlorethylene)
Fuel (including high alcohol content)
Atmospheric and ozone agentsTemperature range-20°C / +200°C (short-term peak at +230°C)
-40°C / +200°C with particular FKMs
Products Show:

Related products
PackingOur Services

1.Anyinquirieswillberepliedwithin 24hours.
2.Professionalmanufacturer.Welcometovisitourwebsite. www.hbsxseal.com 3.OEM/ODMavailable:anyyourideaonsealswecanhelpyoutodesignandputitintoproduction.
4.Highquality,fashiondesigns,reasonable&competitiveprice,fastleadtime.
5.CompleteEquipmentandstrongproduction.
6.BigMarketshareandReceivedverywellbymanycustomers.
7.Multiplemodelstosatisfycustomersfromallovertheworld.Questions:

Q1. Are you a factory or trading company?
We have factory in Xingtai and office in Shijiazhuang, Hebei Province with export license. Convenient Transportation. It's not far from the Zhengding international airport. We warmly welcome clients from all over the world to come to our factory for visit and cooperation.Q2.What's your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.Q3.IfIdon'tlikethestyleofyours,canyoudosomethingelse?
We can open the mould for you first according to your samples or technical drawings. Mould costs are charged if you need thecustomized products.Q4.What's your packing & payment terms?
1). Generally, plastic bag inside and carton box outside or according to the customer's requirements. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
2). For sample and small order, 100% Paypal. Western Union, T/T.
For bulk order, T/T 50% deposit and the balance should be finished before delivery from our factoryQ5. What's your Mode of Transportation& Delivery time ?
1). Small package will shipping by express such as DHL, TNT, UPS, FEDX and so on, Customer should undertake the shipping cost.
Big Volume products often shipping by air/sea, EXW, FOB, CIF, CFR is depend by customers.
2). Delivery time: Generally it is 5-7 working days if the good are in stock, or 10-21 working days after receiving your advance payment. The specific delivery time depends on the items and quantity of your order.Q6. Why choose to cooperate with you?What's your advantage?
1). Strong point:We have our own factory,so the price can be competitive and the quality is reliable.
2). We can offer you a good after-sell service, prompt deliver.
3). We can provide various size and colors according to customers' requirements.
4). By long time testing, quality proved to be excellent.
5). Updated product design.
6). Advanced manufacturing process, with global standards.
7). We win by the high quality and then have a long-term business relationship.Q7. How do you make our business long-term and good relationship?
1). We keep good quality and competitive price to ensure our customers benefit;
2). We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.