Sanitary Stainless Steel SS304/SS316L Manual Welded Butterfly Valve (SMS-No. RD0212)

Sanitary Manual Welded Butterfly ValveApplication:The series of this valve are sanitary pneumatic or manual butterfly valves,which are widely used in stainless steel pipeline system to control and regulate medium flow.Work Principle:This kind of valve can be handled by manual an electric actuator,and also can be handled by a pneumatic actuator.
Electric actuator or pneumatic actuator covert the axial movement of pistion to be 90° rotation of valve shaft.So that the valve can be open or close to achieve the requirement of control and open/close for the pipeline system.They have three type of actuator: normally closed(NC),air/air(A/A).Muti-position handle regulates the valve by 15° in its open or close 12 seats achiening control of medium flow purpose:
Pulling handle regulates the valve through four multi-function positioning,in its open of close four position,also achieves control of medium flow purpose.

Product name

SS304/316L Sanitary Welded Butterfly Valve With pulling Handle

Application:.It is widelyused in thesystems for food,beverage.dairy,brewing,phamaceuatical,bio-pharmaceuatical and chemical industries.

· Body Materials:AIS1-304 or AISl-316L· Gasket MaterialSilicon,EPDM,VTON,NBR· Valve seat and gasket complywith FDA21CFR177 2600· Standard Avaliable:DIN,3A,SMS,ISO /IDF,BS /RJT,and ASME /BPE.· Available in sizes from DN10-DN250 1/2''-10"· Endconnection:Butt-weld,Clamp,Male.Nut,Liner or Flange or other supon request.· Handle:plastic pulling handle (4 positions) or plastic/stainless steel multi position handle (12 positions)· Actuator.pneumatic stainless steel actuator (vertical type).pneumatic aluminum actuator (horizontal type).electric actuator.Technical specification·Pressure :1-10bar· Temperature range:EPDM(-20~120°),VMQ(-20~+150°)FPM(-20~+180°)· Surface treatment:Ra16~32uin(0.4~0.8um)
DELIVERY:
Usually within 15days after receiving T/T down paymentPAYMENT:
We prefer to do T/T or LC.FAQ:
I. Are you factory?
Yes,we are factory and we're specilized in manufacturing Valve and fittings for 15 years.
II. Which countries do you expot to?
We're exporting to about 40 countries around the world. For Europe and America Area ,it takes about 30%,Middle East area:40%, Africa area:30%.
III. If you can do valve in our brand?
Yes,we can do your brand,but need you to provide the certificate of authrization for us.
IV. Where is your factory ?
Our factoury is located in Wenzhou city. If you have time ,welcome to visit us!
V.Which delivery port do you usually use?
There are three port we usually use:Shanghai pot,Ningbo port.
VI,What kinds of certificates do you have?
We have ISO9001:2000 quality certificates,3A certificatesand ISO14001:2014, FDA