A-C2 series dismountable hall effect current Transmitter is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of AC or pulsed currents.Electrical data (Ta=25ºC±5ºC)
TypeA-C2-
50AA-C2-
100AA-C2-
200AA-C2-
300AA-C2-
400AA-C2-
500AUnitRated current(Ipn AC)50100200300400500AMeasure range(Ip AC)0-1000-2000-4000-6000-8000-1000ARated output(Vo DC)@Ip=±Ipn AC 5±1%VSupply voltage±12,±15VPower Consumption25mAOffset voltage@Ip=0 ±30mVOffset drift@ -40~+85ºC ≤±1mV /ºCOutput drift@ -40~+85ºC ≤±1mA /ºCLinearity @Ip=0-±Ipn ≤1%FSResponse time≤200msGalvanic isolation@ 50HZ,AC,1min 2.5KVBandwidth40~20000HZApplications
·Variable speed drives
·Welding machine
·Battery supplied applications
·Uninterruptible Power Supplies (UPS)
·ElectrochemicalMechanical dimension(for reference only)
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
3. Elucidation: 1:+15V 2: -15V 3:V0UT 4:0VDirections for use1.When the current will be measured goes through a transmitter, the voltage will be measured at the output end. (Note: The false wiring may result in the damage of the transmitter)
2. Customs can adjust output amplitude of the transmitter by needs.
3. Custom design in the different rated input current and the output voltage are available.Standards
·UL94-V0.
·EN60947-1:2004
·IEC60950-1:2001
·EN50178:1998
·SJ 20790-2000General date
ValueUnitOperating temperature(TA)-40 to +85ºCStorage temperature (TS)
-40 to +125ºCMass(approx) (M)70g
Characteristics chartEffects of impulse noise
( Output voltage )