This utility model Improve the integrity of the electronic lock by raising the level of the manufacturing process, ensuring accuracy, and simplifying the process.
This utility model can make all the mortise lock upgrade to an electronic door lock by simply replacing the cylinder, The lock mode include password, remote control, fingerprint.
No external power supply, does not require another hole.Technical background
With the continuous development of locks, various kinds of electronic lock have been continually developed and manufacturd, especially those consisted by wireless remote control, password, fingerprint identification and emergency open design. But since we'd integrated electronic, mechanical technology into the lock system, making its internal structure more complex, different shapes and sizes of various manufacturers, made a lot of trouble when we using and replacing.
1.Fingerprint
Touch keyboard to launch the lock
Touch your enrolled finger to the fingerprint sensor.
Identification complete, the door open2.Swipe card
By swiping card to unlock, supports up to 100.
Put the card on the lock identification reader at a standstill for a few seconds to complete the identification.3.Remote control
User press the open button on the remote control within 3 meters away from the door, the door open.4.Password
The touchpad could be the password keypad(0-9 * #)to unlock.
press"*"to enter the password input interface.
Enter the password,press"#"to comfirm.
After entering the correct password,
the door open.Using conical guide push the bolt to open the symmetrical bolt, bolt spring compressing to reset the symmetrical bolt. Setting the locating T-slot in the lock lever adapt to the door more than 60 feet thick, could keep the symmetrical bolt flexible, force area reliable, reset safe, thus integrating electronic, mechanical technology. At the same time, optimize the structure, raising the level of the manufacturing process, ensured the standardization of components, Greatly improve the efficiency of assembly.