0.1%F. S Smart Differential Pressure Transducer with Explosion-Proof Certificate

I Product IntroductionThe differential pressure transmitter is applied to prevent medium in pipes from entering into transmitter directly, and relies on capillary to link with pressure diaphragm. It is suitable to measure the liquid level, density and pressure of liquid, gas or vapor. And it converts pressure signal into 4~20mA DC digital signal. It can communicate, set up and monitor mutually with manipulator by HART protocol.Suitable applied situations:
In petrochemical production process, differential pressure transmitter is always combined with throttling device to measure liquid, vapor and gas flow, or to detect liquid level, liquid interface and differential pressure and other parameters.II Performance SpecificationsZero shift volume
Maximum positive migration volume: difference between migration volume upper range and measuring range
Maximum negative migration volume: measuring range lower limiting valueMeasuring range
Lower range limit: -100%URL~+100%URL-Span
Upper range limit: -100%URL+Span~+100%URLMeasuring range and zero adjustment
HART manipulator, local button,communication software supported by HART protocol.Response time
When the electrical damping of the transmitter turns off, the response time of the step input applied to the transmitter from 10% to 90% of the output range is less than or equal to 0.4s.Technical Data-ASP2001B Smart High Accuracy Pressure Transmitter
Measuring MediaLiquid, gas and steamPressure range0-0.15~2000KPaAccuracy0.1% F.S,Ambient temperature:-40ºC~85ºCRange ratio: 100:1Insulation resistance:>100MΩ (500VDC)Damping value: 0.1~16s (Optional)Temperature affecting value:0.1%F.S/10ºCEMC:EN 61326-1:2013Output signal:4~20mA(Max 22mA,Min 3.8mA)Communication interface:HARTIntrinsic safety: EX ia IIC T6

III Structural Drawing
IV Selection Guide
Selection ListCode 1
1Product category
Differential Pressure TransmitterCode 2
B
CAccuracy
0.1%F.S
0.25%F.SCode 3
H
M
WOutput
(4~20) mA & HART
(4~20) mA & ModBus
WirelessCode 4
2
3
4
5
6
7Measuring range
(0 ─ 0.6 ~ 1.5)kPa
(0 ─ 1.0 ~ 7.5)kPa
(0 ─ 0.4 ~ 40)kPa
(0 ─ 1.86 ~ 186)kPa
(0 ─ 6.9 ~ 690)kPa
(0 ─ 0.02 ~ 2)MPaCode 5
N
B
U
L
RConnecting screw
NPT1/4 Female, no relief valve
NPT1/4 Female, relief valve on Flange's back
NPT1/4 Female, relief valve on Flange's upper side
NPT1/4 Female, relief valve on Flange's lower side
Remote sealCode 6
2
3Isolating diaphragm
316L stainless steel
Hastelloy CCode 7
N
F
PO-ring material process flange
Perbunan (NBR)
Viton(FKM)
TelfonCode 8
0
1
2Installation bracket
No bracket
Carbon bracket
Stainless steel bracketCode 9
C
EInstructions & Nameplate language
In Chinese
In EnglishCode 10
C
ENameplate
In Chinese
In EnglishCode
M
d
i
K
P
E
FOptional
LCD digital indicator
Flameproof Ex d II C T4~T6
Intrinsical safe Ex ia IIC T4~T6
Oil Probhibition
Stainless steel tag lable
NPT1/2 Female waist-type flange
M20*1.5 T-joint---Ø14 Pressure pipeOrder example:
Smart Differential Pressure Transmitter ASP2001B-4H02B7H31B00CiM4
[4]: Measuring range: 0-4.0 ~ 40 kPa
[H0]: Output: 4mA-20mADC/HART, linear
[2]: Isolating diaphragm: 316L stainless steel
Filled liquid: silicon oil
[B]: Location of release port (with plug): Rear face of process flange or no
[7]: Material of O ring: Perbunan (NBR)
[H]: Connecting screw: NPT1/4 female thread[3]: Static pressure: 25
Mounting hole thread: M12
[1]: Electrical connecting screw: M20x1.5 cable gland and plug
Electronic housing: Aluminum with epoxy resin coat
[B00]: No bracket
[C]: In Chinese
[i]: Intrinsical safe Ex ia II C T4~T6
[M4]: LCD digital indicatorFAQ:
1.Q: Are you manufacturer or trading company?
A: We are A professional manufacturer of Pressure/Temperature sensor, wireless transmitters, gateways, even the total solutions of IIOT for more than 11 years in China. With 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with 4~20mA, 0.5~4.5V, UARTand etc, also wireless IOT measurement transmitters. We provide high quality products with high competitive factory price.2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.3.Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.4.Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.6. Q: What is lead time of your product?
A: We are factory, our lead time is always within 10~15 working days for products without customization, but lead time will vary based on different products. You can check detail lead time with our sales.7. Q: What international certificates do you have for your products?
A: we have gained CE, RoHs certificates, and are in the process of gaining ATEX & UL certificates now.