1; 1000 25A Input Small Volume Current Transformer Used for Signal Collection

¨ 50/60 Hz,Single Phase,AC Current Sensor
¨ Dynamic Range from 25 to 30Amps
¨ Meets IEC 60044-1 class 3
¨ Very low temperature coefficient
¨ Meets UL class B (130ºC) thermal insulation system
¨ Meets UL 94V-0
¨ AC isolation resistance: 4KV for 60s
Application
• Digital electricity meter
• Recording
• Power monitoring
• Energy management
• Alternative energy monitoring
ELECTRIC SPECIFICAITON AT 25ºCModel numberTurns RationIpri4Iout5Iprimax6Ioutmax7RSAccuracy
Class3RL8WeightFrequency
rangeAmpsmAAmpsmAOhmsOhms(g)(Hz)LO-GP00081:100025253030 3 2050-60Note:
1.Output voltage is proportional to the derivative(di/dt)of the input current based on the Rogowski Coil principle.
2.All current and voltages assumed to be sinusoidal waveforms at Fr, the constant rated frequency in Hz, measured as RMS value.
4.Ipri=Rated primary current.
5.Iout=Rated secondary current.
6.Iprimax=Sensed max primary current.
7.Loutmax=Sensed max secondary current.
8.RL=Terminating resistance. Varying terminating resistance increases or decreases output Voltage /Ampers according to following
ABSOLUTE MAXIMUM RATINGSOperating free air temperature range-40ºC to 85ºCStorage temperature range-40ºC to 100ºCLEADS INFORMATIONUL1015 24Awg wire black & red 30mm±3.0mmStripped and Tinned4mm±1.0mm