1.6mm Stainless Steel Chromium Carbide Surfacing Wear Resistant Flux Cored Wire

Product Description
HH-806sstainless steel wire for wear resistant applicationIt is a kind of hardfacing material with high extrusion stress, high toughness and crack resistance, which produces austenite and harms the material when it is impacted (work hardening).
Main chemical composition and hardness of surfacing welding:
DIAMETER
1.6mmstainless steel wire for wear resistant application
MAIN INGREDIENTS
C
Cr
Mn
NiVNbMo
HB
ConTENT(%)
0.1-0.2
10-13
13-16
micro
180-220
Current (A)
200-250
Voltage (V)
25-27
Stick out (mm)
25-35
Application:
stainless steel wire for wear resistant applicationIt is usually used to lay the bottom layer in order to surfacing stiffer material, grinding roll, extruding roll, crane wheel, rope pulley, wire drawing disc, etc. During use, no inert gas, arc welding agent. In order to prevent the slag from flowing in front of the weld pool, it is suggested to drag the welding wire position slightly, swinging welding and straight line welding can be used for surfacing multilayer welding.
Manual hardfacing repair procedure:
1. Gauging; 2. HH-806S as build-up layer;3. HH-810S as wear deposit; 4. HH-812Sor HH-814S asTread layer
Related Products:HH-808s stainless steel wire for wear resistant application:
is suitable for load condition combined with impact and wear, such as cone crusher, air pick, hammer plate of crusher, mill roll, high chromium alloy extruding roll surface repair application.the application temperature not exceeding 350°C
Welding hardness: 46-52HRC
Diameter: 1.6mm
HH-810s stainless steel wire for wear resistant application:
Use hard surface treatment for parts subject to high wear and moderate impact, such as vertical grinding rolls, grinding discs, extrusion rollers, propellers, sieve plates, shield machines, etc., at a temperature not exceeding 350 ºC.
Welding hardness: 55-60HRC
Diameter: 1.6mm
hardfacing welding wire product show:
More choices:
Our companywear resistant flux cored welding wireProduction process:
After cutting and joining into the steel strip with our fixed width, the roller squeezes our steel strip into "U Type" form(1.2)and filled up with flux powder with our own special ingredient(3.4). The primarystainless steel wire for wear resistant applicationprocessingare continuously to stretch through the different diameter of the abrasive tool(5.6.7.8). After that, ourstainless steel wire for wear resistant applicationprocessingare going to be packed without a joint into Drum (9)or Spool with waterpoof and desiccant. During the process and after process we have strictlyinspection policy about the filling rate, bending rate, chemical composition and welding perform etc.
Our hardfacing welding wires have remarkable excellent high abrasion, impact, corrosion and heat resistance performance, could produce wear resistant plates, and hardfacing treatment of the abrasived and impacted components, could extend the service life of the components, or pre emptively on new components, or as part of manitenance programme.
Main Features:1. Chemical Composition: High carbon high chromium
2. Hardness: HB180-220
3. Good Performance: no clearing slag, low welding spatter, smooth surface, high welding efficiency, stable filling rate, etc.
4. Welding wire without any joints.
5. Production Capacity: 2000 tons per year
6. Short Delivery Time: Generally 10 days
7. We have many experienced professionals to research and develop welding wires according to customers' specified chemical compositions.
8. We can recommend proper welding wires and provide technical solutions based on working conditions.
9. On site inspection and third party inspection are available.
10. As an ISO9001:2008 approved manufacture, our mission is to improve our management system and provide high quality products continuously.Company Information
Now we have more than 140 employees, including more than 10 R&D staffs. And more than 20 wear plate production lines, 3 welding wire production lines. Our company's registered capital is 30,000,000 RMB, with an annual output of 2,000 tons welding wire and 35,000 Square meters wear plate.Scientific management mode makes us become one of the top ten honest suppliers and top 100 suppliers in Guangxi credit enterprises and cement industry. At the same time, we also passed the ISO9001-2008 international quality system certification.
Packaging & Shipping
Packaging details
1.6mm-2.0mmstainless steel wire for wear resistant application:
15KG/Spool,72 cartons/ pallet.
2.8mmstainless steel wire for wear resistant application:
250kg/drum, 4 drums/pallet
and per spool is vacuum packed by aluminum foil bag in a carton,
Set up a quantity
250 kilos
Warranty
1 year
Payment
T/T,L/C,D/P, Western Union
The products are exported to South Korea, Indonesia,Vietnam,Brazil, Peru, Australia etc.
Our advantages:1. Chemical composition: high carbon and high chromium
2. Hardness: HRC180-200
3.Three. Excellent performance: no slag, low spatter, smooth surface, high welding efficiency, stable filling rate and so on.
4. There is no welding wire with any joints.
5. Production capacity: 5500 tons per year
6. Short delivery time: 7-10 days in general.
7. We have many experienced professionals to research and develop welding wire according to the specific chemical composition of customers.
8. We can recommend suitable welding wires and provide technical solutions according to working conditions.
9. Site inspection and third party inspection.
10. As a manufacturer of ISO 9001:2008 certification, our mission is to improve our management system and constantly provide high quality products.
FAQ
Q:Are you trading company or manufacturer?
A:We are factory.
Q:How long is your delivery time?
A:Generally it is 5-10 days of the goods are in stock,or it is 15-20 days if
the goods are not in stock,it is according to quantitiy.
Q:Do you provide samples?is it free or extra?
A:Yes,we could offer the sample for free charge.
Q:What is your terms of payment?
A:Payment≤1000USD,100% in advance.payment>1000USD,30%T/T in advance,balance before shippment.