10 Port Poe Switch with 2 Port Uplink 10/100Mbps

10 port POE switch with 2 port uplink 10/100Mbps
The TS12P-10F-2Fis a 100M standard PoE switch that provides 12 ports 10/100M adaptive RJ45 ports.Ports 1~10 have PoE power supply capability and can be used as Power over Ethernet devices.The power supply port can automatically detect and recognize the powered device thatcomplies with the IEEE 802.3at/af standard and supply power through the network cable.Supports two modes: normal switch mode/250M ultra-long transmission.
TS12P-10F-2Fmakes it easier for you to deploy wireless access point (AP) and IPterminal network devices using PoE technology.Main Feature
1. Follow IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet Protocol standards.
2. Support IEEE802.3at/af standard, compatible withpowered devices (PD) of
IEEE802.3at/afprotocol.
3. Supports two modes: normal switch mode / 250M ultra long transmission.
4. Provide 10 10/100M auto-adaptive RJ45 ports, of which ports 1~10 supportPoE power supply.
5. All ports support auto flip (Auto MDI/MDI-X) function
6. Support IEEE802.3X full duplex and Backpressure half duplex
7. All ports have wire-speed forwarding capability
8. Support independent learning and aging of MAC addresses
9. Plastic casing, the whole machine is fully loaded with 150W
10. Plug and playDATASHEETModelTS12P-10F-2FPower SupplyPower Supply ModePower AdaptorInput powerDC input 48~57V (default with external 52V 1.73A) AC input 220V 50/60HZPower150wNetwork Port ParameterNetwork Ports1~10 Ethernet Port:10/100Mbps2 Uplink Port:10/100 MbpsTransmission Distance1~10Ethernet Port:0~100m, 0-250m (Extend model)2 Uplink Port:0~100mSoftware SpecificationBasic SkillsFollow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet ProtocolCompatible with IEEE 802.3at/af compliant powered devices (PD)Compatible with certified non-standard powered devices (PD)Store and forwardMAC automatic learning and agingIEEE802.3X full-duplex flow control and Backpressure
half-duplexHardware SpecificationStore and forwardsupportCapacity2.4GMAC address
table2KPOE standardStandard IEEE802.3af/at single port maximum power 30W,
Machine maximum power 150W
Support overcurrent, overvoltage, short circuit protectionData transfer rateEthernet 10Mbps half duplex, 20Mbps full duplex
Fast Ethernet 100Mbps half duplex, 200Mbps full duplexOperating EnvironmentWorking
Temperature0ºC~55ºCStorage
Temperature-40ºC~70ºCHumidity
(non-congeal)Operating humidity: 10% to 90% RH does not condenseStorage humidity: 5% to 90% RH does not condenseMechanical AttributesDimensions
(L*W*H)190MM*140MM*43MMColorBlackWeight1.25kgExplanation Of Function SwitchFunctionWork modeFunctional descriptionNStandard exchange modeAll ports communicate freely, which is suitable
for ordinary data transmission environmentEExtend modelVLAN Extend mode enable,the Max bandwidth for the Network ports (1-10) will be reduced to 10Mbps for each one, Transmission distance will reach 250M