100 Mesh Reduced Iron Powder for Brake Lining/Pad (100.27)

1,Technical Requirements
1.1 The chemical analysis of the product should be in accordance with the rules in Chart 1.
Chart 1
ModelChemical Composition%Fe
≥Impurity Component ≤MnSiCSPAICHydrogen LossRJFHY 80·2598.000.400.150.070.0300.0300.400.50RJFHY 80·2798.000.400.150.050.0300.0300.400.45RJFHY 100·2598.500.350.100.030.0200.0200.300.30RJFHY 100·2798.500.350.100.030.0200.0200.250.25RJFHY 20098.000.350.100.100.0300.0300.500.50 Notes:The content of AIC made from iron ore concentrate powder can be negotiated by both side.
1.2 The powder should be silver gray and there should not be oxide rust. No occluded foreign substance.
1.3 Under the metal scope,the particle shape of the iron powder should be in the shape of the irregular sponge.
1.4 The physical-technical property should be in accordance with the rules in Chart 2.
Chart 2
ModelApparent density
g/cm³fluidity
s/50g
≤compressibility
g/ cm³
≥Screen classification%>250µm
(+60mesh)>180µm
(+80mesh)>150µm
(+100)(+200mesh)>75µm
(+200mesh)(+200mash)<45µm
(-325mesh)FHY 80·252.20~2.45386.400≤3balance5~25FHY 80·272.45~2.70356.450≤3balance5~25FHY 100·252.40~2.60356.60-0≤5balance5~30FHY 100·272.60~2.80306.70-0≤5balance5~30FHY 2002.00~2.80-----≤5≥32 Notes: Except FHY 200,the powder content of other models which is smaller than 75µm(-200mesh)should be 40%~60%.We can CUSTOMIZE any kind of iron powder you need with reasonable price! Please contact us.