1080P HDMI Kvm Fiber Extender

1080P HDMI Kvm Fiber Optic Extender Support Full HD Video Max up to 300m (KHX-1240HD)
Description
HDMI (High-Definition Multimedia Interface) recently has become increasingly popular in the application of video and audio transmission system. In view of the extreme of electrical performances, however, the traditional copper wire cable imposes limits on signal transmission distance and signal quality. In reality, optical fiber is of low dispersion, which in turn has the strength of longer signal transmission distance and better signal transmission quality in comparison to the traditional copper wire cable. DVI/HDMI extender uses 2 cores fiber without any copper wire inside, where radio frequency interference phenomenon is literally ruled out, which shows the advantage of high performance and good signal quality as well as low cost.High Performance - The KHX-1240 series is a high performance 1080PHDMI KVM Fiber Optic Extender that transmits high resolution DVI / HDMI signals over extreme distances using 2 cores fiber. This extender supports HDMI v1.3 signals with resolutions up to 1080P (1920x1080/60p) over cable distances up to 300m.Fiber Optic Extension - The extender set consists of an optical transmitter module that converts the DVI / HDMI signals into light pulses for transmission over a 2 cores fiber. An optical receiver module converts the light pulses back to a DVI / HDMI signal for display on a monitor or projector.Cutting-Edge Optics - Most single-fiber optical extenders transmit signals over multiple optical wavelengths, which can suffer from chromatic dispersion over long cable runs. To avoid this issue, this extender employs a cutting-edge, high-speed SerDes that combines the DVI / HDMI signal channels into a single uncompressed 6.75Gbps bit stream. This enables the optical transmission of the signal over a single optical wavelength, which provides increased signal fidelity, stability and flawless image quality, regardless of cable length. These features make the KHX-1240 series the ideal future-proof choice for systems designers and integrators who need to transmit high resolution DVI / HDMI signals over extreme distances.Key Features
Real Time Transmission
Supports DVI 1.0 and HDMI v1.3
Supports resolutions up to1920*1080/60P
Supports HDMI bit-rates up to 2.25Gbps color,6.75Gbps total
HDCP 1.4 compliant
Support 3D TV pass-through
CEC are NOT supported!
Support EDID pass-through
Support USB Keyboard and USB Mouse
LPCM 7.1, Dolby® TrueHD, and DTS-HD Master Audio™
Plug and Play
Built-in EQ(Receiver)
Up to 300m distance by OM3-300(Custom Available)
Low RFI / EMI profile for sensitive applications
Surface-mountable
Application
Digital Signage
LED signboards in streets and in stadiums
Medical Imaging Equipment
Airplane On-board Video System
Conference Room Video Equipment
Remote monitor for traffic, industrial, military control
LCD, Projector, Plasma display connection
Large video wall system
TV Broadcast Station
Home Theater
SPECIFICATIONSPerformanceComplianceHDMI v1.3Maximum Pixel Clock Frequency225 MHzMaximum Video Bit Rate2.25 GbpsSupported Resolutions1920x1080/60PDigital Audio Support7.1 channel LPCM, 192 kHz, 24-bit audio capabilityConnectionsDVI Input / DVI Output1x HDMI Type-A Female connectorOptical1x SFP+ portCableFiber Cable Type / Max. Length50/125μ OM3-300 Multi-Mode Fiber:≤1,000 ft. (≤300 meters)Extended functionKMSupportUSB Keyboard x 1 / USB Mouse x1CEC SupportCEC are NOT supported!DDC SupportEDID Pass-through Supportonly 300 metersHDCP Pass-through Supportonly 300 metersMechanicalConstructionHigh-impact Alufer enclosureDimensions (L x W x H)89mm x 104 mm x 28.3 mmNet WeightKHX-1240-S: 200 gKHX-1240-R: 200 gEnvironmentalOperating Temperature32° to +122° F. (0° to +50° C)Storage Temperature-40° to +185° F. (-40° to +85° C)Operating Humidity5% to 80% (non-condensing)Storage Humidity5% to 95% (non-condensing)Power RequirementsExternal AC Power AdapterInput: 100-240VAC / 50-60Hz 0.2A
Output: 5VDC, 2.0A5/2.5mm jackPower ConsumptionKHX-1240-S: 3 watts KHX-1240-R: 3 wattsWarrantyLimited Warranty2 year warrantyPort nameSenderReceiverHDMI interfaceHDMI signal inputHDMI signal outputRESETSystem reset bottonSystem reset bottonPOWERPower adapter socketPower adapter socketSFPSFP+ Module CageSFP+ Module CageUSBConnect to PC USB Host Controller1*USB Keyboard and 1*USB MouseLED indicatorD1ON:Power onON:Power onD2ON:ReceiverOptical input isnormalandDisplayer plugged into DVI output portReserveD3SFP+ RX Optical signal Input indicator
ON: Lost of Optical signal
OFF: The optical signalinput is normalSFP+ RX Optical signal Input indicator
ON: Lost of Optical signal
OFF: The optical signalinput is normalD4Blinking:
The Sourceis connectedBlinking:
The monitor is connectedD5SFP+ TX Fault indicator
ON:indicates normal operation OFF:indicates alaser fault of some kindD6ON:USB Device2 link OK Blinking:CommuinicationD7ON:USB Device1 link OK
Blinking:CommuinicationON:USB Device1 link OK
Blinking:CommuinicationD8ON: ErrorON: ErrorPacking List
The 1080PHDMI KVM Fiber Optic Extender ships with the itemslisted below. If any of these items are not present in the box when you first open it,immediately contact your dealer. 1 x 1080PHDMI KVM Fiber Optic Extender (Sender unit)
1 x 1080PHDMI KVM Fiber Optic Extender (Receiver unit)
1x 0.6meters USB2.0 Cable
2 x 5V/2A DC power supplies
1 x User manualOrder information
Product No.DescriptionKHX-1240-S1080PHDMI KVM Fiber Optic Extender with KM Sender UnitKHX-1240-R1080PHDMI KVM Fiber Optic Extender with KM Receiver Unit
Connection Instructions Video
1. Connect the included HDMI cable between the HD source and the HDMI Input port on the Sender
unit.
2. Connect an Ultra HD display to the HDMI Out port on the Receiver unit using another HDMI cable.
Fiber
3. Connect a multimodeduplexLCfiber optic cable, up to 300 meters, between the Fiber port on theSender unit
and the Fiber port onthe Receiver unit. See the table, below for details on fiber cable types anddistance.
USB Keyboard and USB Mouse
4. Connect the included USB2.0 cable between the PC USB Host Controller and the USB Input port on the Sender
unit.KHX-1240-R support one USB Keyboard and one USB Mouse.
Power
5. Use the included power supplies to connect the Sender and Receiver unit toavailable electrical outlets.