10L Supercritical CO2 Extraction Machine for Pure Cbd Oil

NOModelKettleCapacityPressureTem.PowerCo2PumpDimension(mm)1PH120-50-011L50Mpa85C10KW50L/H2600*2600*18002PH120-50-055L50Mpa85C20KW50L/H2600*2600*18003PH120-50-1010L50Mpa85C22KW100L/H3200*2600*18004PH220-50-2010L/10L50Mpa85C28KW200L/H3200*2600*18005PH120-40-2424L40Mpa85C30KW200L/H3500*2600*45006PH220-40-4824L/24L40Mpa85C50KW600L/H5500*3500*45007PH420-40-9624L+24L/24L+24L40Mpa85C60KW600L/H6000*4500*45008PH220-40-10050L/50L40Mpa85C65KW800L/H6000*6000*45009PH420-40-20050L+50L/50L+50L40Mpa85C70KW1000L/H8000*8000*450010PH320-40-300100L/100L/100L40Mpa85C90KW2000L/H20000*20000*7000
For the supercritical extraction machine-
1.CO2 Pumb 2. Cooling System 3.Machine Valve 4.50MPA PressureThese are 3 most important parts that can directly tell by the machine quality and also influnce the machine production
capacity and service time a lot.
CO2 Pumb
Our CO2 Pumb adopted best quality in the market which used all Stainless steel innercavity and3 allceramic stickto reduce
the noise greatly and also will keep the machinework stably in the long time running.
The working pressure can achieve50 Mpa instead of the normal pumb 40 Mpa.The usinglife is the normalpumb5~10times.
Max pressure can achieve 65 Mpa to protect the pumb safe.And the cost is at least3-5 times of normal one.
The normal low quality pumb of otherspressure only40Mpa.Machine adopted lowquality Iron Steel.The pumb stick is ceramic
layer stick or steel stick which is easy towear and leak CO2.Not safe to usefor long time due to the low safety pressure oncethe
pressure is high easy to occur accident .The usinglifeonly 5-15 months.Beyond thetie the abrasion will more serious and start to
leak CO2.
once the pumb broke is very difficult to repair and the replace and workers installationfees areextremely high about at least
USD 6,000
High efficiency Air-cooled type make CO2 tank low down in the suitable temperatureand easy torunning.Inner with high quality
compressorCooling System
Machine with Environmental refrigerant meet the environmental standard and highheat exchange efficiency.
Low efficiency heat exchange.Low cooling power and the actual working is far belowthe machinemarked.Low down the
production speed.
The bad quality cooling refrigerant easy to leak cause pollution and worker injured.Inner compressorfan is low strength once
damage can only replace the compressor or the cooling system.Cause great loss.Machine Valve
The Pressure Valve are the important part of the machine.Directly influence the production process.
And this is the easy damage part.The using frequency is the highest in production.So this part we usedthe best brand in the
market.This is the 'USA' brandTESCOMthe valve brought the most reliable performance.
Valve of poor quality plastic handle when in the low temperature easy to break and not accurately tocontrol the flow.
And some factories even use the valve no any production just directly contact with the metal.This willcause work accident very
possibly.
50MPA Pressure(pipe and tank design)
Our kettle all adpoted SUS 304 and we caiculate the machine size as the inner material capacity insteadof the kettle volume
there are 25~30% size difference.
All our kettle used the screw connection instead of the welding.thickness and weight of kettle also aremuch more than the
others.Even though we incrase lots of cost but this can protect our customersproduction safe more.
All the pipes are covered with insulation cotton to avoid the temperature change form condensate waterdamage machine
and low down the noise greatly.Our workers all have more than 10 years production experience.
And our machine is designed only need connect 6 quickly interface pipes.This is easy and save at leastUSD 6,000-10,000 engineer
abroad installation fees.And all body use SUS 304 easy to clean and not easyto rust.All the parts adopted advanced design to
low down the power loss and increase the production speed.
Basic Flow and Combination style of the super critical CO2 Extraction device:
1. CO2→extraction kettle→separation1→separation2→return circuit
2. CO2→extraction kettle→separation1→separation2→fine distillation column→return circuit
3. CO2→extraction kettle→ine distillation column→separation1→separation2→return circuit
4. CO2→extraction kettle→separation1→fine distillation column→separation2→return circuit