10bar Heated Regenerative Adsorption Desiccant Industrial Air Dryer (KRD-10MXF)

10bar Heated Regenerative Adsorption Desiccant Industrial Air Dryer (KRD-10MXF)Externally heated regenerative desiccant Industrialair dryer is developed based on the successful design of the heatless type and heated typedesiccant air dryers. Adsorption Dryer The purge air is pre-heated before regeneration to reduce its required capacity in order to achieve an energy saving.Regenerative Desiccant Air Dryercould avoids the disadvantage of short switching period of heatless type desiccant air dryer, and at the same time it consumes much less heating energy like heated type desiccant air dryer. This is the energy saving desiccant air dryer you can rely on!
Working principle
This series ofHeatless Regenerative dryer incorporates the working principles of pressure swing adsorption and temperature swing adsorption. Desiccant absorbs water moisture in drying column and being regenerated with high quality dried and heated purge air in regeneration column by air thermal diffusion and high pressure difference mechanisms.
We are specialized in providing compressed air products and solution to our customers all over the world. Our procuct range includes Standard screw air compressor(3kW-315kW), Low and Hight pressure rotary screw air compressor, Oil free screw/scroll compressors, VSD inverter controlled screw compressors,Railway application compressors, Underground application compressors, Biogas/Landfill gas compressor, CNG /LPG application compressors,Zero Purge Desiccant Dryer,High Pressure Desiccant Dryerand Inline air filters/water separator.Future of KRD Series Refrigerated Desiccant Combination Air Dryer
Dry air outlet at low dew point
Extended desiccant service life
Lower maintenance costs
Refrigeration and drying units, filters are all located at one skid for easier access
Advanced auto-mode control system
Less purge air amount is required. Since the compressed air is already dry, purge air amount can be reduced to 3%Technical Parameters:ModelDischarge capacity (Nm3/min)Heater (KW)Discharge pipe connectionsWeight (kg)Dimensions(mm)LWHKRD-1MXF1.21.2DN251446055601188KRD-2MXF2.41.51826055601646KRD-3MXF3.822117505601553KRD-6MXF6.53DN403659738001818KRD-8MXF8.53.5DN5056010629001950KRD-10MXF10.73.964511629001880KRD-12MXF133.972011629002090KRD-16WXF175.1DN80930137411001908KRD-20MXF235.71120137411002208KRD-25MXF2771260142611502160KRD-30MXF328.21370161612002208KRD-40MXF45110DN1001700166612002402KRD-50MXF5512.5DN1252100201614002472KRD-60MXF65152450201614002672KRD-80MXF8520.42800221813002693KRD-100MXF10030DN1505240282016353014
For any other requests please contact Adekom.Adekom Kompressoren (Dongguan) Limited
Tel.:+86 769 88802320
Fax:+86 769 88803230
Web:www.adekom.com.hk