1200Mbps Industrial PLC Ethernet Repeater

Product SpecificationsBrief introductionDIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the HomePlugprotocol and the actual bandwidth up to 500Mbps. The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..Technical parametersSupport HomePlug.Industrial DIN rail style installationActual bandwidth up to 500MbpsThe maximum transfer distance up to 1000 metersSelf-adapt the rate Compatible with all HomePlugdevicesOne Domain Master can manage 128pcs End Point.There can be 4groups(4different Domain Master) of PLC telecommunication devices in the same power line circuit 1.1.2 Manageability Support Remote Firmware update(TR069)802.3D EthernetBridge.802.1QVLAN.QualityofService(QoS).IGMO(IPv4)Snooping&MLD(IPv6)SnoopingSupport local web management1.1.3 Operating environment
Working temperature: -40ºC-80ºC.Operating humidity: 10%-85%no condenseStorage humidity:5%-90%no condense1.1.4 Design standardsHomePlugIEC 60529IEC 50022IEC 60068-2-6MIL-STD-810GModelWD-1201M-DINInterface1*LAN 10/100/1000base-TXself adaption RJ45,1*ACpower interfaceMDI/MDX supportLED display lightEthernet,PLC link ,powerTransfer band2-68MHzProtocol(PHY)IEEE802.3,IEEE802.3x, IEEE802.3uHomePlugSecurity 128-AES Transfer rate(PHY)1200MbpsModulationOFDMEffective transfer rateTCP/IP 500Mbps ManageabilityRemote Firmwareupdate,support TR-069(optional)802.1D Ethernet Bridge802.1Q VLANQuality of Service(QoS) IGMO(IPv4)Snooping&MLD(IPv6)SnoopingWorking voltageAC 90V-520V Operating temperature-40ºC-80ºCSize 67*160*123 (mm)(LxWxH)Weight 0.35kgOperating environmentOperating humidity:10%-85% (no condense) Storage humidity: 5%-90%(no condense)CertificationFCC,CE class B,WEEE,RoHS
1.2 Features
Packet loss:≤0.1%(100M,load 70%)
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs
1.3Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.