130W CO2 Laser Engraver with Rotary Axis

Introduction130W CO2 LASER ENGRAVING MACHINE
New Laser Engraving and Cutting Machine. The machine is a kind of Laser Engraving Machine System equipped with CO2 laser Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc. It is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes,toys and etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.
This machine is equipped with DSP Control System for RDdraw directly,also supports CoreDraw and Auto CAD and other advance software. It must connect with computer with USB cable when you change the settings of machine for the design files,you can transfer the file with USB memory stick to the machine, or can download it to the machine directly with USB cable from computer. Even on the same Job, you can do setting with different colour in the software and also can making holes.And it can the legs separate from the main body of the machine. The machine has doors which can be opened to accommodate larger materials.
Applicable Material:
Wood,bamboo,jade,marble,organic glass, crystal, plastic, garments, paper, leather, penelope, rubber, ceramic, glass, textile cutting, industrial prototyping, industrial marking, signmaking, medical part marking, aerospace, architectural modeling, specialty advertising, plastics fabricating, flexo, point of purchase, rubber stamps, picture framing, gift manufacturing, bar coding, engraving, gasket cutting, puzzles, cabinetry, awards & recognition, personalized pens, door pulls, cut scroll patterns, games & toys, finger joints, inlays & overlays, fraternity paddles, music boxes, light switch plates, jewelry boxes, parts marking, router templates, desk sets, scrap booking, photo albums, jewelry, crafts, Italian charms.
Applicable Industry:
Advertisement,arts and crafts, leather, toys, garments, model, building upholster, computerized embroidery and clipping,packaging and paper industry.CNC ROUTER ROTARY AXIS WITH 80MM
80mm 3-Jaw Scroll Chuck
Stainless Anti-Dust Cover
Surface Steel Plate With Anti-Rusty Coating
Ratio: 1:2.5 Synchronous Pulley Induction
Maximum Holding Range With Jaws:2-70mm
Features
130W CO2 LASER ENGRAVING MACHINEFDA,CE Certification, ISO9001 Quality Certification.More friendly control panel with Color ScreenEnglish, French and more languages updating256 colors makes different working mode to meet complicated designOne key to install, more convenient. Output from Auto CAD directlyOutput from Corel DRAW directlyThe network connection with the IP address of machine.High quality 20mmMO Reflective Mirror
CNC ROUTER ROTARY AXIS WITH 80MMClosed-Loop Control, No Longer Lose Any Steps, Up To Its Maximum TorqueReduced Motor Heating And More EfficientSmooth Motion And Super-Low Motor NoiseHigher Torque And Higher SpeedNo Tuning And Always StableZero-Speed StabilityFast ResponseLower Cost
Technical
130W CO2 LASER ENGRAVING MACHINEControl System :32 bit DSPWorking size: 55"x35"(1400mm x 900mm) with unlimited length designLaser tube type: Co2 Glass sealed laser tubeLaser power: 130WDriver type: Micro Stepping MotorMax speed: 1000mm/sResolution: 1000 DPILocation precision: 0.01mmPC Interface: USB2.0 and USB DiskSoftware: Auto LaserImage form: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AICNC ROUTER ROTARY AXIS WITH 80MMRated Voltage:2.07v DcPhase Resistance (20ºC) 1.38x(1±15%)ω/PhaseThe Maximum Statictorque≥780mn.MSwing( Shaft To See ):A-Ab-B-Clockwise DirectionMaximum No-Load Running Frequency≥2500ppsElectrical Strength:Ac600v/1ma/1sRotor Inertia:220g.M²Step Angle:1.8°±0.09°Rated Current:Dc 1a/PhaseInductance (1khz):30x(1±20%)Mh/PhaseDetent Rorque:320g.Cm Ref.Maximum No-Loadstart Frequency≥1500 PpsInsulation Resistance≥100mω(Dc 500v)Insulation Grade:BQuality 0.8kg Ref.Material Of Pulley:H62Tooth Form:MxlNumber Of Teeth Z=20Pitch Of Teeth P=2.032Pitch Circle:φ12.936Outer Circle:φ12.428±0.003
PackageLaser Engraving software Package (English Version)User Manual (CD)Air exhaust fanCommunication cable3 Reflect optics (installed in the machine)1 Focus optics (installed in the machine)1 Laser tube1 X Rotary Axis
Pictures