Our autoclave could be used to making hollow block bricks for building and construction. Size and Speficication could be standard or customized to meet differernt customers' requirements.Our autoclave has our own patents. And we'll use material of Q345R steel, 16MnII level of making flange forging,φ 133x 25 tube to make DN100.Working process of our autoclave are mentioned below.We have triple safety interlock devices.Details are as follows:Advantages of AAC Autoclave of Olymspan1. Patents we possess at present:A) Autoclave of hydraulic automatic opening-door device (ZL 2011 2 0025592.4)
B) Posses autoclave of automatic door operator (ZL 2011 2 0025674.9)
C) Worktable of cutting kettle tooth (ZL 2011 2 0025738.5)
D) The pressure drainage device of autoclave (ZL 2011 2 0025595.8)
E) Electrical safety interlock device of autoclave (ZL 2011 2 0026871.2)2. Materials:A) Q345R-GB713 of Hangang in Hebei.
B) 16MnII level of making flange forging
C) φ 133x 25 tube to make DN100 and the material is 20-GB9948.3. Working process:A) After welding the door, it must be proceed annealing heat treatment.
B) Polish toothed cutter of flange of autoclave body, and carry out magnetic particle testing.
C) Use double scale container board, and ensure the longitudinal joint of each section.
D) Carry out the physical and chemical test (stretch, impact), ensure its strength.
E) Welds are 100% X-ray detection, then carry out hydraulic test of 2.1MPa after passing. The whole process is complete inspected by CSEI factory inspection, and leave factory after stamp and signature.4. Safety interlock protection:A) Hand speed reducer installs mechanical interlocking, and we don't move when there's pressure in kettle.
B) Equip with manual limited safety interlocking device, stuck kettle manually, and when it opens, then we can open the door.
C) Equip with electric limited safety interlocking device, use cooperatively with manual limit, and connect with electric cabinet, rotating electrical ark with pressure and sound-light alarm.