2000bph 4000bph Automatic Pure Drinking Pure Mineral Water Production Line

2000BPH 4000BPH Automatic Pure Drinking Pure Mineral Water Production Line
PET Blow Mould Machine
1.The Blow Molding system does not require highly trained operators to produce consistent quality bottles.
2.The bottle making process starts by loading preforms into the preheater.
3.The preheater uses a variable speed track that moves the preforms through a heating tunnel. The heat tunnel has specially designed heating elements for a consistent heating operation with minimal maintenance.
4.When the preforms have made one "trip" through the preheater, they are manually loaded two(three or four) at a time into the blow molder. .
5.After the bottles are formed in the blowing cycle, they are removed and the cycle continues. The finished bottles are then loaded directly onto a conveyor for filling or can be stored for later use.
Water treatment
The Reverse Osmosis process uses a semi-permeable membrane to separate and remove dissolved solids, organics, pyrogens, submicron collodial matter, viruses, and bacteria from water. The process is called "Reverse" Osmosis since it requires pressure to force pure water across a membrane, leaving the impurities behind. Reverse Osmosis is capable of removing 95 - 99% of the total dissolved solids (TDS) and 99% of all bacteria, thus providing safe, pure water
3 in 1 water filling machine
Theplasticbottlesarefedintotherotaryrinser,fillercapperbymeansofaninputfeedconveyor.
Astarwheelthentransfersthebottletoneckholdinggripperoftherinsingstation.Therinsingrobot
indexesthebottle180°andactivatestherinsingvalue.Bottlesafterbeingrinsedareautomaticallytransferredbyastarwheeltothefillingstation.Inthefillingstationthebottlesarepickedupbytheneck
andareallocatedindividualfillingvalues.Thestate-of-artfillingvalveissopreciseandaccurateitgives
evenfillinginallbottles.Thefilledbottlesarethentransferredtothecappingstationviaastarwheel.
Thebottlesautomaticallymoveforthecappingstagewherethecapsreleasefromthesorterontothebottles.Thecapsaresealedautomaticallyusingspecialcappinghands.Theentiresystemisenclosed
inastainlesssteel/glassoutercasing.Afterthecappingstagethebottleareautomaticallyejectedoutto
theoutfeedconveyor.The whole equipment is sleek and is capable of bottling various sizes of PET Bottles ranging from 250ml to 2lits.
Shrink Wrapping Machine
Shrink wrapping for transit purposes uses Polythene shrink film, the lowest cost shrink wrapping film available. One reel of film is mounted at a high level and the other is mounted at a low level. The two reels are joined by the sealing head, forming a curtain of film through which the product is pushed. The fully automatic sleeve wrapping machine uses either a driven belt conveyor or a pusher to automatically transfer, collate and wrap the product as programmed in PLC where we can set quantity as per request.
Labeling machine
Itcomprisesofshrinksleeveapplicator,shrinktunnel,steamgeneratorandconveyorandcanbeincorporatedintocustomer'sexistingproductionlineoroperatedstand-alone.
Filledoremptycontainersaretransportedviaaninfeedconveyorandthenmeteredviaarotatingfeedscrew,Asthecontainersenterthelabeler,thelabelsinwebformareopenedandformedintoatubebyamandrel,fedinpreciseregistrationwithaprintedgraphic,cutinpreciseregistration,appliedtoacontainerwhichisthentransportedviaconveyortoasteamtunnelwherecontrolledsteamheatshrinksthesleevetightlyontothecontainer.